Vizio VW26L user manual Telephone & Technical Support, Mailtechsupport@vinc.com

VIZIO VW26L HDTV10F User Manual

Problem

Solution

If you are using TV, AV1, AV2 or Component with 480i input, use the WIDE button

on the remote control to scroll through various screen modes.

You can see a picture but you

Make sure that the volume is not turned down.

cannot hear sound.

Make sure that the sound is not muted.

Make sure that your audio input source cables are connected securely and correctly.

The TV has pixels that are

Your LCD HDTV is manufactured using an extremely high level of precision

always dark or colored.

technology, however, sometimes some pixels of your LCD HDTV may not display.

Pixel defects within industry specifications are inherent to this type of product and do

not constitute a defective product.

You see “noise” or “trash” on

When your LCD HDTV’s digital capabilities exceed a digital broadcast signal, the

the screen.

signal is up-converted (increased) to match your TV’s display capabilities. Up-

converting can cause noise or trash.

You switch to a different input

The TV remembers the volume level from the last time you adjusted it. If the sound

and the volume changes.

level is higher or lower from another source, then the loudness will change.

You switch to a different input

The TV remembers the viewing mode from the last time you used a particular input

and the screen size changes.

(AV, Component, HDMI and TV).

Tips for High-Definition Users.

The LCD HDTV is an ideal platform for viewing High Definition Content.

Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB.

However, due to variances in broadcast practices, it is possible some image

distortions can occur.

Version 2/6/2007

50

www.VIZIO.com