VIZIO VW26L HDTV10F User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.
Power ‘HDTV’ light – When plugged into your power outlet, the HDTV name on the stand will glow red when the HDTV is powered off.
1.2 Right Side Panel Controls
Power ( 
) – Switch the VW26L on by pressing the button once. Press the button again to the VW26L off.
MENU – This button activates the On Screen Display (OSD). If a
CH +/- (▲/▼) – Use these buttons to step up or down the TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus.
VOL +/- (◄/►) – Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus.
INPUT – Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV1, AV2 (S- Video or Video), Component 1, Component 2, HDMI 1, HDMI 2, and RGB. Once you have stepped through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input mode.
1.3 Left Side Connections
1.AV2 In – Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. The orange color band on the side of the TV indicates this connection. The
2.Headphone – Connect your headphone here.
3.SERVICE – This custom communication port is for factory service only.
Version 2/6/2007 | 8 |
| www.VIZIO.com |