VIZIO L30 WGUe User Guide
3.6.2 - Searching for Component Codes
If the user cannot find the manufacturer in the component list or the program code does not work, the user can use the remote control to search for the correct component code.
To search for a component code:
1.Turn on the component.
2.Press the matching component button on the remote control.
3.Press and hold the SETUP button until the LED flashes twice.
4.Press 9 9 1. The LED flashes twice.
5.Point the remote control at the component and then alternate between pressing the POWER button and the component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search procedure.
To clear the component button:
1.Make sure that the component is turned on.
2.Press and hold the SETUP button on the remote control until the LED flashes twice.
3.Press 9 9 2, then press the component button on the remote control twice.
3.6.3 - Reassigning Component Buttons
You can reassign the component buttons on the remote control if you have more than one of the same types of component. For example, if you are using the remote to control the cable (CBL), CD, DVD, TV and two VCRs, you can reassign the AV2 button as a second VCR button.
To reassign component buttons:
1.Press and hold the SETUP button until the LED flashes twice.
2.Press 9 9 2. The LED flashes twice.
3.Press the component button that you want (VCR) once, and then press the component button that you are reassigning (AV2) once. The AV2 button is now reassigned and can be programmed as a VCR component button. See “Programming the VIZIO Universal Remote Control”, page 32.
3.6.4 - Changing Volume Lock
The remote control is set to control volume through your TV while in cable (CBL), DVD, satellite (SAT) and VCR component modes. Use the volume lock if you want to control the volume for all components through a specific component. For example, you want to control volume for all components through the tuner (TNR).
To change the volume lock:
1.Press and hold the SETUP button until the LED flashes twice.
2.Press 9 9 3. The LED flashes twice.
3.Press the component button that you want (TNR) once. The LED flashes twice. Volume will now be controlled through the tuner for all components.
Version - 4/7/2005 | 34 |