VIZIO L30 WGUe User Guide
1.9 - Rear Panel Connections
1.Service – To be used for factory service.
2.DVI/Audio In - Connect a DVD multimedia player, computer or set-top box and the audio through these connections. This is a digital only connector.
3.VGA/Audio In - Connect the video from a computer or set-top box and the audio from a computer, DVD multimedia player or set-top box to these connections.
4.Component HDTV In (Y-Pb-Pr)(green, blue, and red connectors) - Connect the external video devices, such as a DVD player or set-top box. Use the white and red connectors to connect the external audio from the same source. Note: YPbPr is used for the following signals: 480i, 480p, 720p, and 1080i.
5.Component DVD In (Y-Pb/Cb-Pr/Cr)(green, blue, and red connectors) - Connect the external video devices, such as a DVD player or set-top box. Use the white and red connectors to connect the external audio from the same source. Note: YCbCr is used for 480i and 480p only.
6.AV In – Connect composite and/or S-Video devices, such as a VCR of video games. Use the white and red connectors to connect the external audio from the same source.
7.Antenna (TV Input) - Connect to the antenna, satellite or cable service.
8.AV Out - Connect the video and audio from the LCD TV to an external device, i.e., an external amplifier or secondary TV. This output only supports S-video, AV1 and AV2 equipped with A/V inputs. It does not support YPbPr, YCbCr, TV or RGB.
