Vizio VP504 FHDTV10A manual Connecting Coaxial RF, Using Your Antenna or Digital Cable for DTV

VIZIO VP504 FHDTV10A User Manual

2.2 Connecting Coaxial (RF)

2.2.1Using Your Antenna or Digital Cable for DTV

1.Turn off the power to the HDTV.

2.Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector on the rear of the HDTV.

3.Turn on the power to the HDTV.

4.Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.

Note:

a)Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator.

b)Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed information.

c)Make sure the antenna and coaxial cable are correctly grounded.

d)For Professional antenna installation contact us at www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623).

2.2.2Using the Antenna or Cable through your VCR

1.Turn off the power to the HDTV and VCR.

2.Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV.

3.Turn on the power to the HDTV and VCR.

4.Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.

Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.

Version 7/2/2008	17
	www.VIZIO.com