VIZIO VP504 FHDTV10A User Manual
Preparing Your PLASMA HDTV for Wall Mounting
To remove the stand base
1.Unplug all of the cables and cords from your VIZIO VP504 FHDTV10A.
2.Place the VP504 FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3.Remove the cover on the stand.
4.Remove the six (6) screws holding the base to the VP504 FHDTV10A.
5.Carefully remove the stand base. 
Now, the VP504 FHDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the High Definition TV. Please make sure to read the instructions of your specific mount to properly hang the VP504 FHDTV10A.
The pitch of the mounting holes is 600mm horizontally and 200mm vertically.
The screw type required is metric M8, 20mm long, 1.25mm pitch. The length of the screws will depend on the thickness plate being attach to the TV; our brackets come with different length screws.
To find the perfect mount for the VIZIO VP504 FHDTV10A, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly
Version 7/2/2008 | 6 |
| www.VIZIO.com |