VIZIO VP504 FHDTV10A User Manual
4.5.9 DTV / TV Input Parental Control
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV.
When the OK button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page.
Press the 
button to display the SETUP page.
Press the 
button to highlight Parental, then press the 
button.
The Password must be entered before the TV will continue with Parental settings. The default password set in the factory is 0 0 0 0. If you are going to use the Parental Control feature you should change the password.
Note: Make sure you write down and store the new password in a secure place. The Reset All Settings feature (see page 62) does NOT reset the password.
4.5.10 Channel Block
Press the 
button to highlight the Channel Block selection.
Press the 
button to go to the next screen.
Press the 
button to highlight the channel you want to block.
Press the OK button to block the highlighted channel.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Version 7/2/2008 | 57 |
| www.VIZIO.com |