Vizio VP322 manual Basic Plasma Hdtv Start Up, Connecting the Power Cable, Initial Setup

VIZIO VP322 HDTV10A User Manual

Chapter 3 Setting Up to Watch Television

For ‘Preparing Your Plasma HDTV for Wall Mounting’, see page 6.

3.1Basic Plasma HDTV Start Up

1.Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the High Definition TV, and then plug the power cord into an AC wall socket.

2.Connect Audio and Video Cables to the HDTV (see pages 13 ~ 25 for detailed steps)

3.Turning Power On

Once all the components are connected, press the Power ON button on the side of the High Definition TV, or press the Power ON (Orange) button on the remote control.

4.Initial Setup

After powering on the TV set, the Initial

Setup screen will come up; please press the button on the remote control.

a.The Language choice screen will be displayed, the default English option is highlighted. If you wish to change the OSD language to

Español or Français, press the button on the remote control to select the language you want.

Press the button on the remote to go to the next screen.

Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other equipment is being used, please press the LAST key on the remote control and go to Step 5. If this is not your case, please continue at Step b.

Version 4/8/2008	27
	www.VIZIO.com