VIZIO VP322 HDTV10A User Manual
Preparing Your PLASMA HDTV for Wall Mounting
To remove the stand base
1.Unplug all of the cables and cords from your VIZIO VP322 Plasma HDTV10A.
2.Place the VP322 PLASMA face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3.Remove the four (4) screws holding the base to the VP322 PLASMA.
4.Carefully remove the stand base.
Now, the VP322 Plasma HDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the High Definition TV. Please make sure to read the instructions of your specific mount to properly hang the VP322 Plasma HDTV10A.
The pitch of the mounting holes is 400mm horizontally and 200mm vertically.
The screw type required is metric M6, 20mm long, 1.0mm pitch. The length of the screws will depend on the thickness plate being attach to the TV; our brackets come with different length screws.
To find the perfect mount for the VIZIO VP322 Plasma, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly
Version 4/8/2008 | 6 |
| www.VIZIO.com |