Vizio VO47L FHDTV10A manual Connecting Equipment, Which Video Connection Should I Use?

VIZIO VO47L FHDTV10A User Manual

Chapter 2 Connecting Equipment

2.1 Which Video Connection Should I Use?

The VIZIO VO47L FHDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.

Connection

Quality Connector (type)

Best

(digital)

Best

(digital)

- - - - - - - - - - - -

Good

(analog)

Best

(analog)

Better

(analog)

Good

(analog)

Good

(analog)

Rear
Panel	Description
Color
Codes
	HDMI (High-Definition Multimedia Interface) - It is the
	first and only industry-supported, uncompressed, all-
	digital audio/video interface. HDMI provides an
White	interface between any audio/video source, such as a
	set-top box, DVD player, or A/V receiver and an
	audio and/or video monitor, such as a digital
	television (DTV), over a single cable.
	DTV Coaxial RF. When used for MPEG2 encoded
	bit streams from ATSC broadcast programming, this
Black	input takes advantage of the High Definition content.
	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
	TV Coaxial RF. This is the connection for standard
	NTSC TV using antenna or cable.
	RGB PC (VGA) – This video input has separate red,
	green and blue color components. The signal
Blue	carries horizontal and vertical sync information on
	the green signal. This is most commonly used for
	PC input.
	Component 1/2 - The video signal is separated into
Green	three signals, one	containing	the black-and-white
	information and the	other two	containing the color
and
	information. This enhancement over S-Video takes
Purple
	advantage of the superior picture provided by
	progressive scan DVD players and HDTV formats.
	S-Video (AV2) - The video signal is separated into
	two signals, one containing the black-and-white
	information and the other containing the color
Red	information. Separating the color in this way avoids
	‘cross color’ effects where closely spaced black and
	white lines are erroneously displayed in color. It also
	enables text to be displayed more sharply.
	AV1 (Composite) - The complete video signal is
Yellow	carried through this single pin connector. This is the
	most commonly used video connection.

Note: For more info refer to the Quick Start Guide

Version 11/7/2007	16
	www.VIZIO.com