Vizio E321MV Adjusting the TV Settings for Use with a PC, Turning the Vizio Light On or Off

Page 26

5

Adjusting the TV Settings for Use with A PC

Your TV can be used to display output from a home computer using the RGB port.

These settings are only available when viewing content from the RGB port.

To adjust the PC settings:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed.

3.Use the Arrow buttons to highlight PC Settings and press OK.

4.Use the Arrow and OK buttons to adjust each of the following options:

Horiz. Position - Adjust the horizontal (left/right) position of the picture.

Vertical Position - Adjust the vertical (up/down) position of the picture.

Fine Tune - Adjust the synchronization between the PC and the TV. Increase or decrease this setting if you see “waviness” or a blurry picture.

If you would like the TV to automatically adjust the picture for best quality, select Auto Sync and press OK.

E321MV

Turning the VIZIO Light On or Off

This setting allows you to turn off the back-lit VIZIO logo on the front bezel of your TV.

To turn the VIZIO Light on or off:

5.Press the MENU button on the remote. The on-screen menu is displayed.

6.Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed.

7.Use the Arrow buttons to highlight VIZIO Logo and press OK.

8.Use the Left/Right Arrow buttons to select On or Off:

•When set to Off, the VIZIO logo will briefly light up when the TV is turned on. It will remain off while the TV is on.

•When set to On, the VIZIO logo will stay lit while the TV is on.

18

Image 26

Contents Class Razor LED LCD Hdtv To qualify for Energy Star rating Thank You for Choosing Vizio When Reading this ManualWelcome My Product InformationImportant Safety Instructions E321MV DTV Transition Advisory Power LinesTelevision Antenna Connection Protection Lightning ProtectionTable of Contents Troubleshooting & Technical Support Installing the TV Installing the TVInspecting the Package Contents Installing the TV on a Wall E321MV Controls and Connections Rear PanelRight Side Panel Front PanelRemote Control Replacing the Batteries Connecting Your Devices Before You BeginBest Hdmi Completing the First-Time Setup First-time setup is completeChanging the Input Source Adjusting the TV SettingsNavigating the On-Screen Menu Setting Up Channels Customizing Input NamesChanging the Signal Source Scanning for ChannelsScanning for New or Additional Channels Removing Channels from the Master ListChanging the Audio Language Customizing Channel NamesChanging the On-Screen Menu Language Setting the TV’s Date and TimeSetting the Time Zone Setting the Date and Time Adjusting the Time for Daylight SavingsEnabling or Disabling Automatic Date and Time Updates Current TimeAdjusting the TV Settings for Use with a PC Turning the Vizio Light On or OffUsing the Other Menu Settings Setting the Sleep TimerView Slideshow Start a full-screen photo slideshow Using the Photo MenuViewing a USB Photo Slideshow Setting the Screen Aspect Ratio Using the Modify Photo MenuScreen Aspect Ratio Table Adjusting the Equalizer Settings Adjusting the Audio SettingsEnabling or Disabling SRS TruVolume Enabling or Disabling SRS TruSurround HDEnabling or Disabling the Built-In Speakers Adjusting the Speaker BalanceSelecting the Digital Output Mode Resetting the Audio Settngs Adjusting the Picture SettingsAdjusting Bass and Treble Levels Enabling or Disabling the Ambient Light SensorChanging the Picture Mode Adjusting the Noise Reduction SettingEnabling or Disabling Adaptive Luma Adjusting the Color TemperatureEnabling or Disabling Color Enhancement Accessing the Parental Controls Menu Using the Parental ControlsResetting the Picture Settings Enabling or Disabling DCR Dynamic Contrast RatioBlocking and Unblocking Content by Rating Locking and Unlocking ChannelsChanging the Parental Control Passcode Setting the TV Button LocksResetting the Content Locks Restarting the Setup Wizard Viewing System Info and Resetting to Factory DefaultsRestoring the TV to the Factory Default Settingss Displaying System InformationWindow Opacity Change the edge type Setting Up Closed CaptioningChanging the Appearance of Digital Closed Captions Troubleshooting & Technical Support Picture is distorted When I change input source, the volume changesWhen I change input source, the display image changes size Display image does not cover the entire screenSpecifications Limited Warranty FCC warning Legal & ComplianceFCC Class B Radio Interference Statement Canada CSA Germany VDEPage