Changing the Picture Mode

Your TV display can be adjusted to suit your preferences and viewing conditions.

To change the picture mode:

1.Press the OK button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons to highlight Picture and press OK.

3.Use the Arrow buttons to highlight Picture Mode and press OK.

4.Use the Arrow buttons to highlight one of the following options, then press OK:

•Home - Sets the various picture settings to values that will produce the best picture in the most cases. This is the recommended setting.

•Movie - Sets the picture settings to values perfect for watching a movie in a dark room.

•Game - Optimizes the picture settings for displaying game console output.

•Retail - Sets the picture settings to values that produce a brighter, more vivid picture.

•Custom - Allows you to manually change each of the picture settings:

Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. This option is not available unless Ambient Light Sensor is set to Off.

Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.

Contrast - Adjusts the white level of the picture. When this setting is too high, the picture may appear dark. When this setting is too low, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.

Color - Adjusts the intensity of the picture colors.

Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.

Sharpness - Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high definition) content; however, it will

not produce detail that does not otherwise exist.

E321MV

Adjusting the Noise Reduction Setting

Noise reduction diminishes artifacts such as “blockiness” or “pixellation”. When activated, the resulting picture usually has softer edges.

To adjust the noise reduction setting:

1.Press the OK button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons to highlight Picture and press OK.

3.Use the Arrow buttons to highlight Noise Reduction and press OK.

4.Use the Arrow buttons to highlight Off, Low, Medium, or High, then press OK.

5.Press EXIT.