XVT3D500CM / XVT3D580CM
Using Picture-In-Picture (PIP) / Picture-Outside-Picture (POP)
Your TV features PIP and POP modes. These features allow you to watch two input sources at the same time. When using PIP, the main input is displayed on the full screen, and the secondary is displayed in a smaller window. When using POP, the two inputs are displayed side by side.
PIP is only available when the Rating Enable option in the Parental Controls menu is set to Off. See Enabling or Disabling Program Ratings on page 29.
To enable or disable PIP/POP:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight the PIP icon and press OK. The PIP Controls menu is displayed.
3.Highlight PIP Mode and press OK. The PIP Controls menu is displayed.
4.Highlight Off, PIP, or POP. Press OK.
5.If PIP is the PIP Mode selected, use the Arrow buttons to adjust each of the PIP settings:
•PIP Mode - Select Off, PIP, or POP.
•Source - Select the input source for the PIP or POP window.
•Position - The location of the PIP window on the screen. Select Top Right, Bottom Right, Top Left, or Top Right. If PIP Mode is set to
Off, this option is unavailable.
•Size - The size of the PIP window. Select Small, Medium, or Large. If
PIP Mode is set to Off, this option is unavailable.
•Audio - The input for which the TV outputs sound. Select Main or PIP.
If PIP Mode is set to Off, this option is unavailable.
6.Press the EXIT button on the remote.
5
Choosing Inputs for the Main and Secondary Windows
Not all inputs can be displayed using PIP/POP. Use the table below to determine which inputs can be displayed using PIP/POP. (A green box with a 3 between two inputs denotes compatibility.)
| TV | Composite | Component | HDMI | RGB |
| AV | ||||
|
|
|
|
| |
TV |
|
|
| 3 |
|
Composite |
|
|
| 3 |
|
AV |
|
|
|
| |
|
|
|
|
| |
Component |
|
|
| 3 |
|
HDMI | 3 | 3 | 3 |
| 3 |
RGB |
|
|
| 3 |
|
33