Sony CX-NA50 user service TAPE PLAYBACK cont, Continuous Play, Insert tapes into deck 1 and deck

Page 19

TAPE PLAYBACK (cont.)

For example, when the button is pressed while is displayed, playback of the next track starts. Music sensor function may not be able to detect tracks under the following conditions:

•Blanks of less than 4 seconds between tracks

•Noisy blanks

•Long passages of low-end sound

•Low overall recording levels


	TAPE PLAYBACK (cont.)	pg. 12

CONTINUOUS PLAY

After playback on one deck finishes, the tape in other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press the TAPE/DECK1/2 button to select the deck to be played back first.

3 Press the REV MODE button to select .

4 Press the button to start playback.

Playback continues until the Ñbutton is pressed.

About cassette tapes

•To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

•120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

•Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the

Image 19

Contents COMPACT DISC STEREO SYSTEM Englishaiwa1 CX-NA50 For NSX-A54and NSX-A503 AC power cord PRECAUTIONSInstallation Electric PowerDamage requiring Service PRECAUTIONS contTABLE OF CONTENTS MaintenanceCONNECTIONSpg Check your system and accessoriesPREPARATIONS cont.pg Before connecting the AC cordAM loop antenna 3 Connect the supplied antennas4 Connect the AC cord to an AC outlet To position the antennas FM feeder antennaeFront speaker Left Surround speakers CONNECTING AN OUTDOOR ANTENNAPOSITIONING THE SPEAKERS NSX-A54only Standard Positioning cdFront speaker RightThe /PRESET button on the remote control REMOTE CONTROLWhen to replace the batteries To use the SHIFT button on the remote controlBEFORE OPERATION AUDIO ADJUSTMENTSTo cancel DEMO mode SOUNDPress the BBE button VOLUMEGRAPHIC EQUALIZER BBE SYSTEMUsing the headphones MANUAL TUNINGPress the GEQ buttons To cancel the selected mode To select with the remote control2 Press the DOWN or UP button to select a station PRESETTING STATIONSTo select a band with the remote control When an FM stereo broadcast contains noiseRADIO RECEPTION cont PRESET NUMBER TUNINGSelecting a preset number on the main unit To clear a preset stationLOADING DISCS To change the AM tuning intervalCD PLAYING BASIC OPERATIONSReplacing discs during play Selecting a track with the remote controlCD PLAYING cont To check the remaining timeREPEAT play RANDOM/REPEAT PLAYPROGRAMMED PLAY RANDOM playTo check the program TAPE PLAYBACK4 Repeat steps 2 and 3 to program other tracks 5 Press the button to start playbutton to start play When tapes are loaded in both decksMUSIC SENSOR 2 Press the3 Press the REV MODE button to select TAPE PLAYBACK contCONTINUOUS PLAY 1 Insert tapes into deck 1 and deck1 Insert the tape to be recorded on into deck RECORDINGBASIC RECORDING PreparationTo stop recording, press the button RECORDING contINSERTING BLANK SPACES DUBBING A TAPE MANUALLYTo stop dubbing DUBBING THE WHOLE TAPE1 Press the TAPE button 3 Press the TAPE/DECK 1/2 button to select deck1 Insert the tape into deck AI EDIT RECORDINGRECORDING cont Time on cassette tapes and editing time PROGRAMMED EDIT RECORDINGTo stop the recording To clear the edit programto designate the tape length 2 Press the CD button and load the discs3 Press the CD EDIT/CHECK button twice 4 Press theTo change the program of each side KARAOKEMICROPHONE MIXING To stop recordingRecommended microphones When not using the microphonesVOCAL FADER/MULTIPLEX FUNCTIONS 1 Connect your microphone to the MIC jackKARAOKE cont gCancelKARAOKE PROGRAM 3 Repeat steps 2 to reserve other tracks CLOCK AND TIMERSETTING THE CLOCK 3 seconds to select a discTo display the current time SETTING THE TIMERTo switch to the 24-hourstandard DOWN or5 Prepare the source CLOCK AND TIMER contPreparation Using the unit while the timer is set TIMER RECORDINGSETTING THE SLEEP TIMER To cancel timer standby mode temporarilyOTHER CONNECTIONSpg CONNECTING OPTIONAL EQUIPMENTTo cancel the sleep timer When connecting a turntableSUPER WOOFER JACK To adjust the sound level of the external sourceGENERALpg LISTENING TO EXTERNAL SOURCESTo demagnetize the heads CARE AND MAINTENANCETo clean the cabinet To clean the heads and tape pathsSound is emitted from one speaker only TROUBLESHOOTING GUIDETo reset GENERAL There is no soundSignal-to-noiseratio SPECIFICATIONSTuning range Power outputWeight of main unit Power requirementsPower consumption Dimensions of the main unitEndnotes 1 Popup - Popup Warranty 1 year parts/laborProblems/Notes Volume Setting Flashes