Sony CX-NA50 Radio Reception, Manual Tuning, Press the GEQ buttons To cancel the selected mode

Page 11

Press the GEQ buttons.

This unit provides the following three different equalization curves.

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

CLASSIC: Enriched sound with heavy bass and fine treble

Press the GEQ buttons.

To cancel the selected mode

Press the GEQ button repeatedly so that GEQ OFF appears on the display.

To select with the remote control

Press the GEQ button repeatedly while pressing the SHIFT button. The GEQ mode is displayed cyclically as follows.

Using the headphones

Connect headphones to the PHONES jack with a stereo standard plug (ø6.3 mm, 1/4 inch.) No sound is output from the speakers while the headphones are plugged in.

Sound adjustment during recording

The output volume and tone (except BBE) of the speakers or headphones may be freely varied without affecting the level of the recording.

NOTE

When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high frequency sound.


	RADIO RECEPTION	pg. 7

MANUAL TUNING

Image 11

Contents COMPACT DISC STEREO SYSTEM Englishaiwa1 CX-NA50 For NSX-A54and NSX-A503 AC power cord PRECAUTIONSInstallation Electric PowerDamage requiring Service PRECAUTIONS contTABLE OF CONTENTS MaintenanceCONNECTIONSpg Check your system and accessoriesPREPARATIONS cont.pg Before connecting the AC cordAM loop antenna 3 Connect the supplied antennas4 Connect the AC cord to an AC outlet To position the antennas FM feeder antennaeFront speaker Left Surround speakers CONNECTING AN OUTDOOR ANTENNAPOSITIONING THE SPEAKERS NSX-A54only Standard Positioning cdFront speaker RightThe /PRESET button on the remote control REMOTE CONTROLWhen to replace the batteries To use the SHIFT button on the remote controlBEFORE OPERATION AUDIO ADJUSTMENTSTo cancel DEMO mode SOUNDPress the BBE button VOLUMEGRAPHIC EQUALIZER BBE SYSTEMUsing the headphones MANUAL TUNINGPress the GEQ buttons To cancel the selected mode To select with the remote control2 Press the DOWN or UP button to select a station PRESETTING STATIONSTo select a band with the remote control When an FM stereo broadcast contains noiseRADIO RECEPTION cont PRESET NUMBER TUNINGSelecting a preset number on the main unit To clear a preset stationLOADING DISCS To change the AM tuning intervalCD PLAYING BASIC OPERATIONSReplacing discs during play Selecting a track with the remote controlCD PLAYING cont To check the remaining timeREPEAT play RANDOM/REPEAT PLAYPROGRAMMED PLAY RANDOM playTo check the program TAPE PLAYBACK4 Repeat steps 2 and 3 to program other tracks 5 Press the button to start playbutton to start play When tapes are loaded in both decksMUSIC SENSOR 2 Press the3 Press the REV MODE button to select TAPE PLAYBACK contCONTINUOUS PLAY 1 Insert tapes into deck 1 and deck1 Insert the tape to be recorded on into deck RECORDINGBASIC RECORDING PreparationTo stop recording, press the button RECORDING contINSERTING BLANK SPACES DUBBING A TAPE MANUALLYTo stop dubbing DUBBING THE WHOLE TAPE1 Press the TAPE button 3 Press the TAPE/DECK 1/2 button to select deckRECORDING cont AI EDIT RECORDING1 Insert the tape into deck Time on cassette tapes and editing time PROGRAMMED EDIT RECORDINGTo stop the recording To clear the edit programto designate the tape length 2 Press the CD button and load the discs3 Press the CD EDIT/CHECK button twice 4 Press theTo change the program of each side KARAOKEMICROPHONE MIXING To stop recordingRecommended microphones When not using the microphonesVOCAL FADER/MULTIPLEX FUNCTIONS 1 Connect your microphone to the MIC jackKARAOKE PROGRAM gCancelKARAOKE cont 3 Repeat steps 2 to reserve other tracks CLOCK AND TIMERSETTING THE CLOCK 3 seconds to select a discTo display the current time SETTING THE TIMERTo switch to the 24-hourstandard DOWN orPreparation CLOCK AND TIMER cont5 Prepare the source Using the unit while the timer is set TIMER RECORDINGSETTING THE SLEEP TIMER To cancel timer standby mode temporarilyOTHER CONNECTIONSpg CONNECTING OPTIONAL EQUIPMENTTo cancel the sleep timer When connecting a turntableSUPER WOOFER JACK To adjust the sound level of the external sourceGENERALpg LISTENING TO EXTERNAL SOURCESTo demagnetize the heads CARE AND MAINTENANCETo clean the cabinet To clean the heads and tape pathsSound is emitted from one speaker only TROUBLESHOOTING GUIDETo reset GENERAL There is no soundSignal-to-noiseratio SPECIFICATIONSTuning range Power outputWeight of main unit Power requirementsPower consumption Dimensions of the main unitEndnotes 1 Popup - Popup Warranty 1 year parts/laborProblems/Notes Volume Setting Flashes