Sony CX-NA50 user service CLOCK AND TIMER cont, Prepare the source, Preparation

Page 31

CLOCK AND TIMER (cont.)

The unit can be turned on at a specified time every day with the built-in timer.

Preparation

Make sure the clock is set correctly.

Use the remote control.

1 Press the TIMER button while pressing the SHIFT button once to display •, and press the SET button within•4 seconds.

is displayed, and the hour flashes.

NOTE

If you press the SET button after 4 seconds, another operation may start.

2 Designate the hour of the timer-on time by pressing the DOWN or UP button, and the SET button. Repeat to designate the minute of the timer-on time.

After you designate the timer-on time, one of the source name flashes on the display for 4 seconds.

3 Within 4 seconds, press the FUNCTION button to select a source.

The selected source name flashes for 4 seconds. At this time, the selected function button does not light up.

•If this step is not completed within 4 seconds, repeat from step 1.

•If the TUNER button is pressed, the band cannot be selected in this step.


CLOCK AND TIMER (cont.)	pg. 20

4 Within 4 seconds, select the duration for the timer-activated period with the DOWN or UP button.

The duration for the timer-activated period can be set between 5 and 240 minutes in 5-minute steps. If this step is not completed within 4 seconds, repeat from step 1.

5 Prepare the source.

To listen to a CD, load the disc to be played first on try 1.

To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, tune in to a station,

6•Press the POWER button to turn the unit off after adjusting the volume and tone.

remains on the display after the power is turned off (timer standby mode.)

When the timer-on time is reached, the unit turns on and begins play with the selected source.

• The volume level is automatically set to 16 when the power is turned off with the volume level set to 17 or more.

Image 31

Contents COMPACT DISC STEREO SYSTEM Englishaiwa1 CX-NA50 For NSX-A54and NSX-A503 AC power cord PRECAUTIONSInstallation Electric PowerDamage requiring Service PRECAUTIONS contTABLE OF CONTENTS MaintenanceCONNECTIONSpg Check your system and accessoriesPREPARATIONS cont.pg Before connecting the AC cordAM loop antenna 3 Connect the supplied antennas4 Connect the AC cord to an AC outlet To position the antennas FM feeder antennaeFront speaker Left Surround speakers CONNECTING AN OUTDOOR ANTENNAPOSITIONING THE SPEAKERS NSX-A54only Standard Positioning cdFront speaker RightThe /PRESET button on the remote control REMOTE CONTROLWhen to replace the batteries To use the SHIFT button on the remote controlBEFORE OPERATION AUDIO ADJUSTMENTSTo cancel DEMO mode SOUNDPress the BBE button VOLUMEGRAPHIC EQUALIZER BBE SYSTEMUsing the headphones MANUAL TUNINGPress the GEQ buttons To cancel the selected mode To select with the remote control2 Press the DOWN or UP button to select a station PRESETTING STATIONSTo select a band with the remote control When an FM stereo broadcast contains noiseRADIO RECEPTION cont PRESET NUMBER TUNINGSelecting a preset number on the main unit To clear a preset stationLOADING DISCS To change the AM tuning intervalCD PLAYING BASIC OPERATIONSReplacing discs during play Selecting a track with the remote controlCD PLAYING cont To check the remaining timeREPEAT play RANDOM/REPEAT PLAYPROGRAMMED PLAY RANDOM playTo check the program TAPE PLAYBACK4 Repeat steps 2 and 3 to program other tracks 5 Press the button to start playbutton to start play When tapes are loaded in both decksMUSIC SENSOR 2 Press the3 Press the REV MODE button to select TAPE PLAYBACK contCONTINUOUS PLAY 1 Insert tapes into deck 1 and deck1 Insert the tape to be recorded on into deck RECORDINGBASIC RECORDING PreparationTo stop recording, press the button RECORDING contINSERTING BLANK SPACES DUBBING A TAPE MANUALLYTo stop dubbing DUBBING THE WHOLE TAPE1 Press the TAPE button 3 Press the TAPE/DECK 1/2 button to select deck1 Insert the tape into deck AI EDIT RECORDINGRECORDING cont Time on cassette tapes and editing time PROGRAMMED EDIT RECORDINGTo stop the recording To clear the edit programto designate the tape length 2 Press the CD button and load the discs3 Press the CD EDIT/CHECK button twice 4 Press theTo change the program of each side KARAOKEMICROPHONE MIXING To stop recordingRecommended microphones When not using the microphonesVOCAL FADER/MULTIPLEX FUNCTIONS 1 Connect your microphone to the MIC jackKARAOKE cont gCancelKARAOKE PROGRAM 3 Repeat steps 2 to reserve other tracks CLOCK AND TIMERSETTING THE CLOCK 3 seconds to select a discTo display the current time SETTING THE TIMERTo switch to the 24-hourstandard DOWN or5 Prepare the source CLOCK AND TIMER contPreparation Using the unit while the timer is set TIMER RECORDINGSETTING THE SLEEP TIMER To cancel timer standby mode temporarilyOTHER CONNECTIONSpg CONNECTING OPTIONAL EQUIPMENTTo cancel the sleep timer When connecting a turntableSUPER WOOFER JACK To adjust the sound level of the external sourceGENERALpg LISTENING TO EXTERNAL SOURCESTo demagnetize the heads CARE AND MAINTENANCETo clean the cabinet To clean the heads and tape pathsSound is emitted from one speaker only TROUBLESHOOTING GUIDETo reset GENERAL There is no soundSignal-to-noiseratio SPECIFICATIONSTuning range Power outputWeight of main unit Power requirementsPower consumption Dimensions of the main unitEndnotes 1 Popup - Popup Warranty 1 year parts/laborProblems/Notes Volume Setting Flashes