Vizio RP56 manual Picture Adjust PC Modes, PIP Setup

VIZIO RP56 User Guide

PICTURE ADJUST – PC Modes

CONTRAST – Adjusts the contrast of the picture.

BRIGHTNESS – Adjusts the brightness of the picture. Users may need to readjust the brightness after the DLP TV warms up.

H POSITION – Adjusts the horizontal screen position. V POSITION – Adjusts the vertical screen position.

AUTO CONFIG – Automatically adjusts to the best settings.

ADC CLOCK – Removes any vertical distortion and clears or sharpens the displayed characters.

ADC PHASE – Removes any horizontal distortion and clears or sharpens the displayed characters.

WIDE FORMAT - Adjusts the screen width to STRETCH, CENTER, PANORAMIC, or ZOOM viewing mode.

PIP SETUP

PIP STYLE – Turns PIP mode on or off, or chooses one of the following pre-set modes:

ƒ SPLIT – The screen is divided in half. The left side is the main picture and the right side is the sub-picture.

ƒ POP – The screen is in the 16:9 mode and divided in half. The left side is the main picture and the right side is the sub-picture.

ƒ MAIN + 3 – The main picture is on the left and there are three small sub-picture windows on the right.

ƒ MAIN + 7 – The main picture is on the bottom left and there are four small sub-picture windows across the top and three small sub-pictures on the right.

ƒ SCAN – The screen is divided into 12 small sub- pictures.

WIDE – Changes the sub-picture size. Choose between 4:3 and 16:9.

SIZE – Changes the size of the sub-picture.

H POSITION – Moves the sub-picture left or right. V POSITION – Moves the sub-picture up or down.

TRANSPARENCY – Adjusts the sub-picture transparency.

04033030