Vizio RP56 manual Remote Control Operation, Using the PIP Remote Control, Common Sense Cautions

VIZIO RP56 User Guide

Remote Control Operation

Common Sense Cautions

ƒDo not drop or mishandle the remote control.

ƒDo not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

ƒAvoid heat and humidity.

ƒWhen not using the remote control for a long period, remove the batteries.

ƒDo not take apart the batteries, heat them, or throw them into a fire.

Using the PIP Remote Control

The PIP Remote Control is exclusively for control of all PIP mode options. In addition, the Universal Remote Control can also be used to control the PIP mode options.

oPress the red PIP button on the PIP Remote Control to activate the PIP (Picture-In-Picture) mode. The PIP (sub screen) window will appear on the screen superimposed on the main screen. When you press this button again it will deactivate the PIP mode and the window will disappear.

oPress the SIZE + button to increase the size of the PIP window. Each press of the button will increase the window size one step; holding the button depressed will cause size of the window to be increased step-by-step automatically.

oPress the SIZE - button to decrease the size of the PIP window. Each press of the button will decrease the window size one step; holding the button depressed will cause size of the window to be decreased step-by-step automatically.

oWhen the PIP window is visible, press the SWAP button and the main picture will switch to PIP window and the PIP picture will replace it on the main screen. Press the SWAP button again and the pictures will switch back again.

oWhen the PIP window is visible, press the STYLE button and the DLP TV will show the main and sub pictures as a split screen with the screen being divided equally between the two pictures but the content will be squeezed into the half width so that people will appear long and thin. Press the STYLE button again and will change to POP (Picture-On-Picture) mode in which both pictures are equal again but this time the height is adjusted to match the width of each picture so that people are in the correct proportions. Press the STYLE button again and the format will change to Main+3 mode which means there is a large main picture and three smaller sub pictures stacked on the right side of the screen; each one of the sub pictures in turn becomes live for a few seconds after which it freezes while the other two take their turn in being live. Press the STYLE button again and the format will change to Main+7 mode which means there is one larger main picture and seven smaller sub pictures arranged along the top and right edge of the screen and they alternate between live and freeze as for the previous mode. Press the STYLE button again and the format will change to Scan mode in which the screen is split into a grid of twelve equal size pictures the first of which, (top left) is the main picture and the eleven sub pictures are refreshed as in the previous two modes. Press the STYLE button again and the format will change to PIP mode, which is where cycle of choices began.

oPress the SOURCE button one or more times to select the video input desired.

Note: The DVI or RGB input cannot be used as a sub picture source.

040330 33