Sequence and Burn-In Sub-Menus
Sequence Sub-Menu
Press the +/- buttons to manually step through a sequence of defined tests. Each step loads a given video format and test image. Menu buttons permit the operator to gate
video color information, change sync types and turn all signal outputs on and off. The firmware includes a sample test sequence. For the future, custom editing software is planned to allow you to create and download your own test sequences.
Red color signal ON/OFF
Green color signal ON/OFF
Select analog composite sync
Select digital 
composite sync
Blue color signal ON/OFF
Line 1: Name of Test Sequence currently running
Line 2: Current step number in sequence
Line 3: Video format used in current step
Line 4: Pattern displayed in current step
Select digital separate sync
Test signal outputs ON/OFF
Burn-in Sub-Menu
Uses the Run/Stop menu button to cycle the generator automatically and continuously through each of the video patterns for the current video format. Menu buttons permit you
to gate video color information, change sync types and turn all signal outputs on and off.
Red color signal ON/OFF
Green color signal ON/OFF
Select analog composite sync
Select digital 
composite sync
Blue color signal ON/OFF
RUN/STOP
Line 1: Name of
Line 2: Current step number in cycle
Line 3: Video format used in current step
Line 4: Pattern displayed in current step
Select digital separate sync
Test signal outputs ON/OFF
Page 18