Before Operation (Cont’d)
Initial Settings
You can install your own Personal Preferences.
Initial Settings General Operation
1 | Press SETUP. |
|
The setup menu appears. |
| |
| Disc Audio | Original |
| Disc Subtitle | English |
| Disc Menu | French |
| Rating | German |
| Area Code | Spanish |
| TV Aspect | Italian |
| Menu Language | Chinese |
| Progressive Scan | Polish |
| Digital Audio Output | Hungarian |
|
| Russian |
| Others | Other — — — — |
2 | Press | / to select the desired item. |
The screen will display the current setting for the | ||
| selected item, as well as alternate setting(s). | |
| While the desired item is displayed, press , | |
3 then / | to select the desired setting. | |
4 | Press ENTER to confirm your selection. | |
Some items require additional steps. | ||
5 Press SETUP, RETURN or PLAY to exit the setup menu.
If you press SETUP or RETURN to exit the setup menu, DVD Player will be in stop mode. So, you must press PLAY to play back.
Language
Disc Language DVD
Select a language for the disc’s Menu, Audio and Subtitle.
Original : The original language included on the disc is selected.
Other : To select another language, enter the
Disc Audio | Original |
Disc Subtitle | English |
Disc Menu | French |
Rating | German |
Area Code | Spanish |
TV Aspect | Italian |
Menu Language | Chinese |
Progressive Scan | Polish |
Digital Audio Output | Hungarian |
| Russian |
Others | Other — — — — |
Menu Language
Select a language for the setup menu. This is the menu you see when you press SETUP.
Disc Audio | English | |
Disc Subtitle | Spanish | |
Disc Menu | French | |
Rating |
|
|
Area Code |
| |
TV Aspect |
| |
Menu Language |
| |
P | i S |
|
Picture
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
| Disc Audio | 4:3 Letterbox | PREPARATION | |
nected. Displays theatrical images with masking bars |
| |||
above and below the picture. |
|
| ||
4:3 Panscan: Select when a standard 4:3 TV is con- |
| |||
nected. Displays pictures cropped to fill your TV screen. |
| |||
Both side of the original picture may be cut off. |
| |||
16:9 Wide: Select when a 16:9 wide TV is connected. |
| |||
| Disc Subtitle | 4:3 Panscan |
| |
| Disc Menu |
| 16:9 Wide |
|
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Progressive Scan DVD
Progressive Scan Video provides the highest resolution pictures with less flicker and line structure.
If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Disc Audio | Off |
Disc Subtitle | On |
Disc Menu |
|
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Notes
–Progressive Scan is available only when the VIDEO OUTPUT switch on the rear panel is set to COMPO-
NENT/PROGRESSIVE SCAN.
Caution
Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Pointing the remote at the player, press the STOP key to stop any disc that is playing. Next, press the STOP key again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.