Toshiba VB602M manual Operation with DVD, Video CD and Audio CD, Exchanging discs during playback

Page 16

Operation with DVD, Video CD and Audio CD

Playing a DVD, Video CD and Audio CD

Playback Setup DVD VCD2.0 VCD1.1 CD

zTurn on the TV and select the video input source corresponding to the DVD player.

zAudio system: Turn on the audio system and select the input source connected to the DVD player.

1 Press OPEN/CLOSE to open the disc tray.

2 Load your disc in the center position, with the label facing up.

Do not load a disc in the

left and light side position.

Center position

When a double-sided DVD is inserted, make sure the side you want to play is facing up.

Discs can be loaded one at a time by pressing DISC SKIP to rotate the carousel.

3 Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu may appear instead.

If a disc menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD that contains a menu.

DVD

 

Use the

buttons to select the title/chapter

and additional selections you want, then press ENTER to start playback.

Press TOP MENU or MENU to return to the disc menu screen.

VCD2.0

zUse the number buttons to select the track you want to view.

Press RETURN to return to the disc menu screen.

zMenu setting and the exact operating procedures for using the disc menu may differ depending on the disc. Follow the instructions on each menu screen.

You also may set PBC to Off under setup. See page 14.

Notes

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see “Parental Control”, on page 15).

DVDs may have a region code.

Your player will not play discs that have a region code different from your player. The region code for this player is 1 (one).

Exchanging discs during playback

zPress DISC CHANGE on the front panel during play- back to open the disc tray.

zPress DISC SKIP to rotate the disc trays to the desired position. The carousel will rotate clockwise by one disc increments.

zExchange the discs and press DISC CHANGE or OPEN/CLOSE to close the disc tray.

Note

The disc tray presently loaded in the play position can not be exchanged.

Skipping discs

Press DISC SKIP during play or when playback is stopped.

Notes

When DISC SKIP is pressed, the disc tray rotates and playback begins from the beginning of the next disc.

If there is no disc on the next disc tray, the following disc tray will be selected.

When DISC SKIP is pressed during playback of disc 5, playback of disc 1 will start.

Exchanging the disc and starting playback

1.Press OPEN/CLOSE during playback or when play- back is stopped.

Play stops (if pressed during playback), the disc tray opens and the disc that was in the play position comes to the front.

2.Exchange the disc.

3.Press OPEN/CLOSE or PLAY again.

The tray closes and playback begins (with the disc that was in front).

1-48

Image 16
Contents DVD Player Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Before Use Playable DiscsDisc-related terms Types of video CDsAbout Symbols PrecautionsBefore Use Cont’d Disc Tray Front Panel and Display WindowInsert a disc here Remote Control Operation Range Remote ControlRemote control battery installation Rear Panel Connecting to a TV ConnectionsVideo connection Good Video connection BetterDigital Multi-channel sound Connections Cont’d Connecting to Optional EquipmentAmplifier Receiver Repeat mode Icons Before Operation General ExplanationOn-Screen Display On-screen display operationBefore Operation Cont’d Initial Settings Initial Settings General OperationLanguage PictureBefore Operation Cont’d SoundChanging the 4-digit password If you forget your 4-digit passwordParental Control Rating DVDOperation with DVD, Video CD and Audio CD Exchanging discs during playbackSkipping discs Exchanging the disc and starting playbackMoving to another Title Moving to another CHAPTER/TRACKStill Picture and Frame-by-frame playback Pause CDTime Search Selecting the sound enhancementDVD Video Discs Repeat Chapter/Title/Off Video CDs and Audio CDs Repeat Track/Disc/All/OffSpecial DVD Features DVD Programmed Playback with Video CD and Audio CD Programmed Playback with Video CD and Audio CDOperation with MP3 Disc Playing an MP3 disc MP3 Pause MP3Moving to another Track MP3 Repeat Track/All/Off MP3Operation with Jpeg Disc Viewing a Jpeg disc Jpeg Moving to another FileRepeat All/Off Press / to select the Jpeg then pressProgrammed Playback with MP3 or Jpeg Disc Jpeg Disc MP3 JpegRepeat Programmed Tracks/All/Off MP3 Repeat Programmed All/Off JpegVideo Mode Setting DVD VCD2.0 VCD1.1 Detailed Description of each Video ModeAdditional Information Last Condition MemoryTroubleshooting Symptom Cause CorrectionLanguage Code List Code LanguageArea Code List Code AreaSpecifications AccessoryGeneral SystemLimited Ninety 90 Day Warranty Limited One 1 Year WarrantyRental Units Commercial UnitsLimited Warranty DVD Video Player How to Obtain Warranty Service