Setting Up the Audio Options | Surround Sound Speaker Setup |
Surround Sound Speaker Setup |
| Setting Up the Display Options |
|
|
|
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play DTS sound disc.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Speaker Setup
Note
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
•Manufactured under license from Dolby Laborato- ries. “Dolby” and the
•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
•In case of
Digital output discs will be output as 2 channel Discs that prohibit downmixing also mute the digital output.
•In case of SACD Digital output is mute.
1.With the unit in Stop mode, press the SETUP button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.
|
| AUDIO SETUP | |
| Digital Output | : PCM | |
| DTS | : Off | |
| Dynamic Compression | : On | |
| PCM Down Sampling | : On | |
|
|
|
|
| Speaker Setup |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5.Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.
SPEAKER SETUP
On
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small) Select the size of the speakers to be connected.
•Front (FL, FR)
-Large: Normally select this.
-Small: When the sound distorts or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer.
•Center
-None: If you do not connect a center speaker, select this.
-Large: Normally select this.
-Small: When the sound distorts, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers.
•Surround (SL, SR)
-None: If you do not connect a surround speaker, select this.
-Large (Rear/Side): Normally select either of these according to the rear speaker’s position.
-Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear, select either of these according to the rear speaker’s position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers.
Setting up TEST
The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.
FRONT(L) ➝ CENTER ➝ SUBWOOFER (LFE)➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
Note
How to make the SETUP menu disappear or return to menu screen during set up. Press RETURN or LEFT button.
•The subwoofer test output signal is lower than the other speakers.
•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.
•If you Set Front (FL, FR) “Small”, LFE is sat “On” automatically.
1.With the unit in Stop mode, press the SETUP button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
|
| DISPLAY SETUP | |
|
|
| |
| TV Aspect | : Wide |
|
| Still Mode | : Auto | |
| Screen Messages | : On | |
| Front Display | : Auto Dim | |
| Black Level | : On | |
|
|
|
|
|
|
|
|
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).
1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
| ||
|
|
|