Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
•Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
•If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
•Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.
Connection to an Audio System
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
•Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.
| Method 1 |
| Method 2 |
| Method 3 |
| Method 4 |
Basic Audio | Good |
| Better |
| Best |
| Optimum |
picture |
| picture |
| picture |
| picture |
TV
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
Player
R - AUDIO - L
Analog Audio Out
(2 Channel)
Method 2
5.1ch Analog Amplifier
Audio Input Jacks
R | SURROUND | L | S/W |
R | FRONT | L | CENTER |
ANALOG AUDIO OUT
Analog Audio Out
(Multi Channel)
Method 3
Dolby Digital Decoder Digital Audio Input Jack
OR
OPTICAL
COAXIAL
Digital Audio Out
AV Cable | Video | ||
Cable | Cables | ||
| |||
| OR | OR |
DVD
Player
R - AUDIO - L | VIDEO |
|
| |
Audio Output | Video Output | Component Video | Component Video | |
Jacks | Jack | Jack | Jacks | Jacks |
|
|
| (Interlace) | (Progressive) |
Method 1
DVD Player + TV with Video Input Jack
(The Video Output must select the
Method 2
DVD Player + TV with
(The Video Output must select the
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output must select the 525i(480i) by setting Video select switch.)
Method 4
DVD Player + TV with Progressive Scan Jacks.
(The Video Output must select the 525p(480p) by Video select switch.)
•If you want to convert Video Output to the Progressive Scan, you have to first connect Video or
•If 525p(480p) Video Output is selected by setting Video select switch, Video(Composite) and
•Our set do not have Video output setting in setup menu.
Note
•In case of
•In case of SACD playback cannot use multi channel or 2 channel Digital Audio out. (See page 31~32)
Important Note
•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
•Depending on your TV, the Method of connection may differ from the illustration above.
| ||
|
|
|