Toshiba SD-260SA, SD-260SV, SD-260SY manual Digital Output

Audio

Digital Output

Selected the output sound format corresponding to your system connection.

1)	Press / to select Audio.
2)	Press ENTER.
3)	Press ENTER button, then press / to shift
	and change the output sound format.

4)Press ENTER.

5)Press RETURN.

PCM: Select when connected to a 2 channel digital stereo amplifier.

The DVD video player outputs sounds in the PCM 2 channel format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 OR MPEG2 recording system.

Bitstream: Disc audio raw data will be output.

Note

When you make a connection to a TV, or Dolby Surround Pro Logic or stereo system via the analog audio jacks, select “PCM” or “Bitstream”.

Rating

Password / Parental DVD

DVD discs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD disc can be controlled may vary from disc to disc.

For example, if the disc allowed, you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or you could lock out playback of the disc altogether.

•DVD video discs may or may not respond to the parental lock settings. This is not a defect in the DVD video player. Make sure this function works with your DVD video discs.

1)	Press	/ to select the Rating.
2)	Press ENTER.
3)	Press	/ to select Parental and then press
	ENTER repeatedly to set the parental lock
	level.
4)	Press	to the Password and enter your 4-

digits security code, then press ENTER button.

5) Press RETURN.

Password	- - - -	Password	- - - -
Parental	8. Adult	Parental	8. Adult
Default	No	Default	No

Notes

•If you make a mistake before pressing ENTER button, press CLEAR button and enter your 4-digit security code again.

•You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function.

(continued)

Function setup

55