Parental
Language Picture Sound Parental Other
Password
Parental Off
0 9/Clear 
/Enter/Setup/Return
Parental control setting
Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.
1)Press C or D to select “Parental”, then press B or A until the level you require appears.
• Level Off: The parental controlsetting does not function.
•Level 8: All DVD software can be played back.
•Level 1: DVD software for adults cannot be played back.
Select from the level 1 to level 8. The limitation will be more severe as the level number is lower.
2)Press C or D to select “Password”.
Press number buttons
• If you input a wrong number, press CLEAR.
3)Press ENTER to store the password.
Note: Now the rating is locked and the setting can not be changed unless you enter the correct pass word.
Notes:
•Depending on the discs, the unit cannot limit playback.
•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.
To change the parental level
1)Press C or D to select “Password”.
2)Press number buttons
3)Press ENTER.
• The rating is now unlocked.
4)Press C or D to select “Parental”, then press B or A to change the parental level.
5)Press C or D to select “Password”, then press number buttons
6)Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1.Press OPEN/CLOSE to open the disc tray.
2.Remove the disc.
3.Press OPEN/CLOSE again to close the disc tray. “No Disc” appears on the screen.
4.While holding STOP down on the front panel, press 7 on the remote control. “PASSWORD CLEAR” ap- pears on the screen.
5.Enter a new password again.
Notes:
•Depending on the discs, the unit may not be able to limit playback.
•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.”
For those discs, the parental control feature will not work.
Other
Language Picture Sound Parental Other
OSD Language | English |
| English |
|
|
|
| Francais | |
|
|
| Espanol | |
/Enter/Setup/Return |
|
| ||
OSD Language
The setup language can be selected.
English: To display OSD language is English.
Francais: To display OSD language is Francais.
Espanol: To display OSD language is Espanol.
Note:
If each setup (pages 35~37) has been completed, the unit can always be worked under the same conditions (espe- cially with DVD discs).
Each setup will be retained in the memory if you turn the power off.
37
2C01501A | 37 | 12/16/03, 19:59 |