Dynamic Range Control (DRC) | Line1 Select |
DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
Press SETUP in the stop mode.
1 Press b or a to select “Audio”, then press 5 or ENTER.
If you connect an another unit (DVD, VCR or etc.) to the LINE IN1 sockets, you must select the type of audio input.
Press SETUP in the stop mode.
1 Press b or a to select “Audio”, then press
5or ENTER.
2 Press 4 or 5 to select “DRC”.
Language | Picture |
| Audio | Parental | |
DRC |
|
|
|
| |
Std |
|
|
| ||
Line1 Select | Coaxial |
|
|
| |
BACD/Enter/Setup/Return
2 Press 4 or 5 to select “Line1 Select”.
Language Picture Audio Parental
DRC | Std |
Line1 Select | Coaxial |
BACD/Enter/Setup/Return
Press a or ENTER, then press 4 or 5 to | ||
3 select your desired sound type. |
| |
Language | Picture Audio | Parental |
DRC | Std | Max |
Line1 Select | Coaxial | Std |
|
| Min |
BACD/Enter/Setup/Return |
| |
Max: Full dynamic range is increased.
Std: Full dynamic range is maintained.
Min: Dynamic range is reduced.
4 | Press ENTER. |
The selected sound type remains. |
5 Press SETUP or RETURN to close the screen.
3 Press a or ENTER, then press 4 or 5 to select the appropriate type of audio input.
Language Picture Audio Parental
DRC | Std |
| Optical |
Line1 Select | Coaxial |
| Coaxial |
|
|
| Analog |
BACD/Enter/Setup/Return
Optical: The Optical lead is connected to the OPTICAL IN socket.
Coaxial: The Coaxial lead is connected to the COAXIAL IN socket.
Analog: The Audio/Video lead is connected to the Audio(L/R)/VIDEO INPUT(LINE IN1) sockets.
Press ENTER.
4 The selected appropriate type remains.
5 Press SETUP or RETURN to close the screen.
Notes:
• This function works only during playback of Dolby Digital recorded discs.
•The level of Dynamic Range Reduction may differ depending on DVD video disc.
22