Toshiba SD-63HK owner manual Selecting progressive scan, To select Progressive scan Off

Page 35

Progressive scan

The progressive scan capability provides the highest resolution pictures with less flicker and line structure.

If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, set PROGRESSIVE to Off.

If you are using the Component video sockets for connection to a TV or monitor that is compatible with a progressive scan signal, set PROGRESSIVE to On.

Note: This unit supports the progressive scan only for NTSC DVDs.

Selecting progressive scan

Preparation:

•Connect to a TV equipped with component sockets.

•Turn ON the TV and set it to the corresponding video input mode.

•Set the VIDEO OUTPUT selector switch on the rear panel to COMPONENT position.

•Press DVD/FM/AM selector to select the DVD mode.

Load an NTSC DVD disc.

1 Press PROGRESSIVE in the stop mode. The current progressive mode appears on the display window for 4 seconds.

Press PROGRESSIVE again to change the progressive mode “ON” or “OFF” during the progressive mode appears on the display win- dow.

•The unit recognizes the picture source (film or video) of the current disc according to the disc information.

2 Press PLAY to start playback.

■To select PROGRESSIVE scan Off

On the step 1 above, select “PRO. OFF”.

Notes:

•JPEG CDs can not be play back with the progressive scan- ning mode.

•Some discs may not be played back with the progressive scan- ning mode correctly because of the disc characteristics or re- cording condition.

•If your TV does not accept the progressive scan format, the picture will appear scrambled if you select progressive scan output from the unit. In such a case, select PROGRESSIVE scan Off.

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).

When the unit plays back a film source material, uninterlaced

progressive output signals are created using the origi- nal information. When a video content is played back, the unit interleaves lines between the interlaced lines on each to create the interpolated picture and outputs as the progressive signal.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents SD-63HK Location of the required label Safety PrecautionsSome DOS and DON’TS on the Safe USE of Equipment To obtain a clear picture PrecautionsOn storing discs On cleaning discsStructure of disc contents On handling discsVideo CD equipped with PBC function Version On Video CDsPlayable discs Video CD not equipped with PBC function VersionTable of contents Rear panel Identification of controlsFront panel Video CD Display windowIdentification of controls Loading batteries Operating with the remote controlVideo connection Connecting to a TVConnections FM/AM aerial connections Connecting to optional equipmentSpeaker system connection Audio setup Selecting surround mode Surround Delay Speaker setupVolume Centre DelaySetting Menu language DVD setupSetting OSD language Setting Subtitle language Press Or ENTER, then press 4 or 5 to Select On or Off Press 4 or 5 to select Tv ScreenPress 4 or 5 to select Display Your desired screen typeSetting Select Files Setting Jpeg IntervalPress 4 or 5 to select Line1 Select Dynamic Range Control DRC Line1 SelectOr Enter Press 4 or 5 to select DRCTo change the parental level Parental control settingLanguage code list Resuming facility Playback procedureBasic playback Press OPEN/CLOSEPicture zoom Zoom mode press Zoom repeatedly to return to a 11 view OffSpecial playback Locating a chapter or track Press number buttons 0-9 to change Marking the scenes Locating desired sceneReturning to the scenes Repeat playback Press Playmode during playback or stop modeTitle, Chapter and Track Repeat playback Or Enter to select Program Press Playmode during stop mode Press / to select Play ModeProgramme playback Random playback Changing anglesLR v L v R Title selectionDVD menu SubtitlesPress number button 1 in the stop mode, then press Disc StatusTo turn off the PBC To make status display disappear, press Display againMP3/WMA/JPEG CD information MP3/WMA/JPEG CD OperationAbout file menu MP3/WMA CD playbackRotating an image Jpeg CD playbackSlide show playback Or number buttonsOn the above, select PRO. OFF Progressive scanSelecting progressive scan To select Progressive scan OffRadio operation Tuning the radio stationsPresetting the radio stations SET + or Listening to the radioReception of RDS Radio Data System stations Other functions Symptom Cause Correction Before calling service personnelInput/Output SpecificationsSupplied accessories General
Top Page Image Contents