Chapter1Introduction
Preparation of the remote control
Set up the remote control to operate the player and your TV.
Loading batteries
1 Open the cover.
2 Insert batteries.
7Use 2 batteries (AAA sizes).
7Make sure to match the + and – on the batteries to the marks inside the battery compartment.
3 Close the cover.
Notes
Operating with the remote control
Point the remote control at the remote sensor and press the buttons.
Distance: About 7 m (23 ft) from the front of the remote sensor
Angle : About 30° in each direction of the front of the remote sensor
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the environment in mind.
Always dispose of batteries in accordance with applicable laws and regulations.
If the remote control does not operate correctly, or if the operating range becomes reduced, replace all batteries with new ones.
When necessary to replace batteries in the remote control, always replace all batteries with new ones. Never mix battery types or use new and used batteries in combination.
Be sure to use AAA size batteries.
Always remove batteries from remote control if they are dead or if the remote control is not be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.
Caution
Never throw batteries into a fire.
16