Toshiba 42HPX95 owner manual Using the remote control, Learning about the remote control

3 Using the remote control

Learning about the remote control

The buttons used for operating the TV only are described here. For a complete list of the remote controlÕs functions, see the remote control functional key chart on pages 34Ð35.

For a list of the buttons that operate the TV Guide On Screenª system, see page 59.

POWER turns the TV on and off. Press POWER to turn on the TV. The red LED indicator on the TV will be illuminated. Press POWER again to turn off the TV.

SLEEP accesses the sleep timer (page 94).

LIGHT The first press of the LIGHT button lights the keypad and turns on the Illumination mode. With the Illumination mode on, pressing any key lights the keypad for 5 seconds (10 seconds if youÕre in programming mode). Subsequent presses of the LIGHT button toggle between turning the Illumination mode on and off.

Channel Numbers (0Ð9, Ð/100) directly tune channels. The ÒÐÓ button is used to tune digital channels (page 76) or to display the favorite channel list (page 49).

INPUT selects the video input source (page 72).

MODE cycles through the six remote control device modes: TV, CBL/SAT, VCR/PVR, DVD, AUDIO1, and AUDIO2. The mode indicator light will remain lit for a few seconds (page 33).

PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 77).

TheaterNetª DEVICE displays a list of available TheaterNet devices (page 50).

TheaterNetª CTRL accesses the on-screen IR device control icons (page 51).

MENU accesses the main TV menu system (pages 40 and 41) or opens a menu in the TV Guide On Screenª system (Chapter 7).

TV GUIDE opens the TV Guide On Screenª system (Chapter 7).

INFO provides detailed information on highlighted items in the TV Guide On Screenª system (Chapter 7).

ENTER activates highlighted items in the main menu system and the TV Guide On Screenª system.

Arrow buttons (yz x •) When a menu is on-screen, these buttons select or adjust programming menus. (Also see x / • on the next page.)

CH yz cycles through programmed channels when no menu is on-screen (page 47) and functions as page up/down when a menu is on-screen or when the TV Guide On Screenª system is open (Chapter 7).

VOL yz adjusts the volume level.

EXIT closes on-screen menus and the TV Guide On Screenª system.

(Continued on next page)

Note: The error message ÒNot AvailableÓ will appear if you press a key for a function that is not available

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	31
#01E_031-039_4250HPX95	31	05.9.12, 11:47 PM
	Black

(E) 42/50HPX95 *web 213:276