Toshiba 42HPX95 owner manual For more information, call your local cable operator, You will need

Chapter 2: Connecting your TV

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual.

Connecting a digital CableCARD™

This digital television is capable of receiving analog basic, digital basic, and digital premium cable television programming by direct connection to a cable system providing such programming.

A security card (such as a digital CableCARD™), provided by your cable operator, is required to view encrypted digital programming.

Certain advanced and interactive digital cable services (such as video-on-demand, a cable operator’s enhanced program guide, and data-enhanced television services) will not work with the use of a CableCARD™ and may require the use of a separate set- top box from your cable operator.

For more information, call your local cable operator.

You will need:

￿one digital CableCARD™ (contact your cable operator)

￿digital cable subscription service (contact your cable operator)

TV back panel

From digital Cable service (connect to ANT 1 only)

This cable should be connected to ANT 1 terminal directly. If you connect the cable via a VCR, the TV may not receive the signals correctly.

________

CableCARD is a trademark of Cable Television Laboratories, Inc.

￿To view encrypted digital channels:

1.Connect your digital Cable TV cable to ANT 1.

2.With the front of the CableCARD™ facing up, insert it into the CableCARD™ slot on the back of the TV (see illustration below left).

3.After the CableCARD™ is inserted, a CableCARD™ option appears in the Applications menu, with informational screens provided by your digital CableCARD™ service. See page 56 for additional information.

CableCard Connected -- Acquiring
channel information.
CableCard services will only operate	Applications
	TV Guide On Screen			IP Service
with cable signal connected to Antenna 1.
	Audio Player			Conditional Access
	Picture Viewer			CableCARD(tm) Status
	Digital CC/Audio Selector			Network Setup
	CableCARD			CableCARD(tm) Pairing
		Navigate	Select	CH RTN Back EXIT Exit

Note:

¥Always use the EJECT button to remove the CableCARDª. Never remove the CableCARDª by hand.

¥Never insert any object or card (including, without limitation, a PCMCIA card) other than a CableCARDª into the CableCARDª slot.

¥Always make sure the CableCARDª is facing the correct direction.

¥Connect the cable for your digital cable TV service to ANT 1 only.

¥When using a CableCARDª, channel programming is unnecessary because the CableCARDª automatically loads the cable channel list into the TVÕs channel memory (page 47).

¥The CableCARDª may take up to 5 minutes to ÒpairÓ with the TV and download channel information. CableCARDª information and channels will not be available until this process is completed.

CableCARDª technology, like all new and emerging technology, may from time to time experience compatibility issues due to the different ways in which television manufacturers and cable system operators implement the CableCARDª specifications. Most issues can be easily resolved. In the event that you experience any performance-related CableCARDª issues with your Toshiba television, please contact the following:

¥In the U.S., call TACP Consumer Solutions at (800) 631-3811 or visit http://www.tacp.com/customersupport/contact.asp.

¥In Canada, call TCL Customer Service at 1-800-268-3404.

14		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_014-030_4250HPX95	14	05.9.12, 10:17 PM
	Black

(E) 42/50HPX95 *web 213:276