Toshiba 42HPX95 Connecting a device to the IR blaster continued, Using the TheaterNetª IN

Chapter 2: Connecting your TV

Connecting a device to the IR blaster (continued)

Using the TheaterNetª IN:

For additional control options for your home theater system, you

TheaterNet™ on-screen device control

can connect an IR receiver/repeater (not included) or a home theater control system (not included) to the TV’s TheaterNet IN terminal.*

Contact your home theater electronics dealer for details about home theater control systems.

You will need:

￿one IR cable

TV back panel

For additional control options for your home theater system, set up the TheaterNet on-screen device control feature. You can use this feature to control many IR remote-controlled devices and IEEE1394 devices using the on- screen control icons.

See pages 50Ð54 for details on setting up and using TheaterNet.

See pages 25Ð27 for details on connecting IEEE1394 devices.

Toshiba Video 3

ENTER

TOP MENU EXIT

Note: The TheaterNet on-screen icons are the only device functions available when the icons are on-screen. To access other device functions, close the TheaterNet icon window.

OUT IN

Back of IR receiver/repeater or home theater control system* (not included)

With this connection, point the Toshiba TV remote control at the front of the IR receiver/ repeater or home theater control system to operate the TV.

IR receiver/repeater or home theater control system

*The TheaterNet OUT function has been verified for use with Toshiba infrared-controlled devices. The TheaterNet IN function has been verified

for use with SmarTouchª STS/STS-C wireless RF control systems. Due to the wide variation in remote control operation among manufacturers, these functions may or may not operate with other brands.

SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com).

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	23
#01E_014-030_4250HPX95	23	05.9.12, 10:17 PM
	Black

(E) 42/50HPX95 *web 213:276