Toshiba 42HPX95 Setting the time and date, Setting the HDMI audio mode, To set the time and date

Chapter 6: Setting up your TV

Setting the AVHD device skip time

When you connect an external AVHD (audio/video hard drive) device—such as the Toshiba Symbio™ AVHD Recorder—to one of the TV’s IEEE1394 ports, you can use the AVHD device skip time feature to set the number of minutes the device will skip forward or backward when you press the SKIP buttons.

Note:

¥This TV will work best with the Toshiba TM AVHD Recorder for recording high definition and standard definition material from either tuner and for controlling live TV (pause/rewind/ etc.). When the Symbioª AVHD Recorder is connected to the TV, the remote control keys (Live, STOP, REW, PAUSE, PLAY, etc.) are automatically activated to allow pausing of live TV.

¥When you connect an AVHD (or D-VHS) device, the TV Guide On Screenª system is automatically configured to allow recording. See page 26 for device connection information. See Chapters 5 and 7 for details about setting up and using the TV Guide On screenª system.

To set the AVHD device skip time:

Setting the time and date

Note: If you already set up the TV Guide On Screenª system, the time and date were set automatically and you can skip this step.

To set the time and date:

1.Press MENU and open the Setup menu.

2.Highlight Installation and press ENTER. (A new set of Installation menu icons will appear on-screen, as shown in step 3 below.)

3.Open the Time And Date menu, highlight Start Setup, and press ENTER.

Time And Date

Start Setup

If you have not set up the TV Guide On Screen™ system, the following screen will appear. To set the time, highlight TV Guide On Screen™ and press ENTER. The TV Guide

1.Press MENU and open the Setup menu.

2.Highlight AVHD Skip Time and press •.

3.Press y or z to select the AVHD skip time (1, 3, 5, or 15 minutes) and press ENTER.

Setup

Sleep Timer			1 min
On/Off Timer			3 min
PC Settings			5 min
HDMI 1 Audio		Auto	15 min
HDMI 2 Audio		Auto
Slide Show Interval		2 Sec
AVHD Skip Time		15 min
Navigate	Select CH RTN Back		EXIT Exit

On Screen™ setup sequence will start, and the time and date will be set automatically.

Time And Date

Your TV Guide On Screen system can provide accurate

time and date information.

It is recommended you set up TV Guide On Screen

first and use it to obtain the time and date.

Manual TV Guide On Screen Cancel

Setting the HDMI™ audio mode

To set the HDMI audio mode:

1. Press MENU and open the Setup menu.

2. Highlight HDMI 1 (or	Setup
		Installation		Auto
2) Audio and press •.		Sleep Timer		Digital
		On/Off Timer		Analog
3. Press z or y to select		PC Settings
		HDMI 1 Audio	Auto
the HDMI audio mode		HDMI 2 Audio	Auto
		Slide Show Interval	2 Sec
(Auto, Digital, or
Analog) and press		Navigate Select	CH RTN Back EXIT Exit

ENTER. (Auto is the

recommended mode). See “Connecting an HDMI or a DVI device to the HDMI input” on page 21.

If you have already set up the TV Guide On Screen™ system, or if you have not set up the time, the time and date setting screen will appear and you will need to manually set the time and date.

Time And Date
Date (MM/DD/YY)
	0	6	/	3	0	/	0	5
Time (HH:MM)	1	1	:	1	1		AM

Cancel Done

Note:

¥If you highlight TV Guide On Screenª (above) to set the time and date through the TV Guide On Screenª system and a power outage occurs, the time and date will be updated automatically when the power is restored.

¥If you highlight Manual (above) to set the time and date manually and a power outage occurs, you will lose the time and date settings when the power is restored.

¥If you manually set the time and date and then perform TV Guide On Screenª setup, the manual time and date settings will be overridden by the TV Guide On Screenª settings.

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	55
#01E_049-057_4250HPX95	55	05.9.12, 10:19 PM
	Black

(E) 42/50HPX95 *web 213:276