Toshiba 42HPX95 Manually setting up the network, Resetting the network address, address continued

Chapter 11: Using the THINC™ home network feature

B. Set up the network address (continued)

Manually setting up the network

address (continued)

6.The message “Obtain network address automatically?” appears.

Highlight No and press ENTER.

Basic Network Setup

Obtain network address automatically?

YesNo

7. The Basic Network Setup menu appears.

Press y or z to highlight the IP address field, and then use the Number buttons on the remote control to input the IP address.

Basic Network Setup

Please enter your Network Address Information

	IP Address
	Subnet Mask
	Gateway(Router)
DNS(Domain Name Saver)
	Cancel	Done

8.Press z to highlight the Subnet Mask field, and then use the Number buttons to input the Subnet Mask.

9.Press z to highlight the Gateway (Router) field, and then use the Number buttons to input the Gateway (Router) address.

10.Press z to highlight the DNS (Domain Name Server) field, and then use the Number buttons to input the DNS address.

11.When finished, highlight Done and press ENTER.

The Basic Network Setup menu closes and the Network menu appears.

12.Go to section C, ÒSet up file sharing on your PC,Ó on page 111.

Note:

¥If you used an Ethernet crossover cable to connect your PC directly to the TV, you will not be able to use the automatic setup. You will have to manually set up the network address.

¥If you used a hub or switch to connect the TV to your home network, you will not be able to use the automatic setup. You will have to manually set up the network address.

¥If you used a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

Resetting the network address

1.Press MENU and open the Setup menu.

2.Highlight Installation and press ENTER. The Installation menu appears.

3.Open the Network menu.

4.Highlight Basic Network Setup and press ENTER.

5.The message “Your Basic Network Setup is complete. Would you like to start over?” will appear.

To continue, highlight Yes and press ENTER.

To return to the Network menu, highlight No and press

ENTER.

Basic Network Setup

Your Basic Network Setup is complete. Would you like to start over?

YesNo

6.If you selected Yes in step 5, the message “Obtain network address automatically?” will appear.

Basic Network Setup

Obtain network address automatically?

YesNo

To obtain the network address automatically, go to step 5 under “Automatically setting up the network address” on page 108.

To manually enter the network address, go to step 6 under “Manually setting up the network address” at left.

For home network troubleshooting tips,

see pages 124-125.

110		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_108-120_4250HPX95	110	05.9.12, 10:22 PM
	Black

(E) 42/50HPX95 *web 213:276