Toshiba 42HPX95 owner manual Tuning to a specific channel, SurfLock, Programmed or unprogrammed

Chapter 8: Using the TV’s features

Tuning channels (continued)

Tuning your favorite channels		Switching between two channels using
To tune to the channels you programmed as Favorite Channels,		Channel Return
see page 49.		The Channel Return feature allows you to switch between two
		channels without entering an actual channel number each time.
Tuning to the next programmed channel		1. Select the first channel you want to view.
To tune to the next programmed channel:		2. Select a second channel using the Channel Number buttons
		(and the dash (–) button if selecting a digital channel).
Press CHANNEL yz on the remote control or TV side panel.
		3. Press CH RTN on the remote control. The previous
Note:
		channel will display. Each time you press CH RTN, the TV
¥	This feature will not work unless you program channels into the	will switch back and forth between the last two channels
	TVÕs channel memory (see page 47).	that were selected.
¥	If you are recording a digital channel, you will only be able to	Note:
	change analog channels while the recording is in progress. If you	¥	If you press CH RTN from a non-antenna input, the TV will
	are recording an analog channel, you will only be able to change		return to the last-viewed ANT input and channel.
	digital channels while the recording is in progress. This is	¥	If you are currently recording a program, this feature will
	because the TV tuner that is being recorded (digital or analog)
			not be available.
	will be locked on the channel that is currently recording.

Tuning to a specific channel	Switching between two channels using
	SurfLock™
(programmed or unprogrammed)
Tuning analog channels:	The SurfLock™ feature temporarily “memorizes” one channel
	in the CH RTN button, so you can return to that channel
Press the Channel Number buttons (0–9) on the remote
	quickly from any other channel by pressing CH RTN. To
control. For example, to select channel 125, press 1, 2, 5.
	memorize a channel in the CH RTN button:
Tuning digital channels:	1. Select the channel you want to program into the CH RTN
Press the Channel Number buttons (0–9) on the remote	button.
control, followed by the – (dash) button and then the sub-	2. Press and hold CH RTN for about 2 seconds until the
channel number. For example, to select digital channel 125-1,	message “Channel Memorized” appears on the screen. The
press 1, 2, 5, –, 1.	channel has been programmed into the CH RTN button.
Note: If a digital channel is not programmedÑeither through	3. You can then change channels repeatedly, and when you
the automatic channel scan (page 47) or the channel add/	press CH RTN, the memorized channel will be selected.
delete function (page 48)Ñyou will have to tune the RF	The TV will return to the memorized channel one time only.
channel using the Channel Number and Dash buttons on the
remote control.	Once you press CH RTN and then change channels again, the
	CH RTN memory will be cleared and the button will function
	as Channel Return, by switching back and forth between the last
	two channels that were selected.
		Channel Numbers
		Ñ (dash)

CHANNEL yz

		CH RTN
76		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_072-083_4250HPX95	76	05.9.12, 10:20 PM
	Black

(E) 42/50HPX95 *web 213:276