Toshiba 42HPX95 B. Set up the network address continued, Manually setting up the network address

Chapter 11: Using the THINC™ home network feature

B. Set up the network address (continued)

5.The message “Obtain network address automatically?” will display. Highlight Yes and press ENTER.

Basic Network Setup

Obtain network address automatically?

YesNo

6.The message “Please wait…” will display while the TV is attempting to load the network address information from the DHCP server.

Basic Network Setup

Please wait...

If the automatic network address setup is successful, go to step 7.

If the automatic network address setup is not successful, go to step 8.

7.If the automatic network address setup is successful, the following screen will appear:

Basic Network Setup

Done! Network address information has been found!

OK

a)Press ENTER to close the screen and return to the Network menu.

b)Skip to section C, ÒSet up file sharing on your PC,Ó on pages 111-112 .

8.If the automatic network address setup is not successful, the following screen will appear:

Error.Unable to obtain network address information.

Please re-check network connections and DHCP server

status.

Try Again?

YesNo

a)Make sure all the cables for your home network are securely connected.

b)Make sure your home network is set up properly.

See page 30 for TV connection information. Consult the ownerÕs manuals for your other components.

c)Make sure the DHCP and security settings on your home router are correct. Consult the ownerÕs manual for your router.

d)Continue with step 9.

9.EitherÉ Retry the automatic network address setup by following these steps:

a)Highlight Yes and press ENTER.

b)Repeat steps 1–6.

OrÉ Cancel the automatic setup and try manually setting up the network address by following these steps:

a)Highlight No and press ENTER.

b)Go to ÒManually setting up the network address,Ó below.

Manually setting up the network address

1.This setup requires the data listed below. You can get this data from either your ISP or the configuration utility for your DSL/cable modem or router.

IP address:

___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___

Subnet mask:

___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___

Gateway (Router) address:

___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___

DNS (Domain Name Server) address:

___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___

2.Press MENU and open the Setup menu.

3.Highlight Installation and press ENTER. The Installation menu appears.

4.Open the Network menu.

5.Highlight Basic Network Setup and press ENTER.

Network

Basic Network Setup

E-mail Scheduling Setup

Home File Server Setup

Navigate Select CH RTN Back EXIT Exit

(Continued on next page)

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	109
#01E_108-120_4250HPX95	109	05.9.12, 10:22 PM
	Black

(E) 42/50HPX95 *web 213:276