Understanding the auto power off feature, ATSC signal only

Chapter 8: Using the TV’s features

Displaying TV setting information on-screen using RECALL

To display TV setting information on-screen:

Press RECALL on the remote control.

The following information will display on-screen (if applicable):

•Current input (ANT 1, ANT 2, VIDEO 1, etc.)

•If ANT 1 or ANT 2 is the current input, whether it is

	Cable TV (“CABLE”) or
	Cable TV (“CABLE”) or	STEREO		Tuner Hold: On
	off-air (“TV”)
•	Channel number (if in	NC-17
•	Channel number (if in	On Timer: Weekdays 12:00pm
	ANT 1 or ANT 2 mode)	Sleep Timer: 18 min.
•	Signal strength indicator	Game Timer: 28 min.		ANT 1
				ANT 1

	(bar graph in lower right	Natural		CABLE 81-1
		Natural
	corner of screen; for	1080i	5:32pm
	corner of screen; for

ATSC signal only)	Sample RECALL screen

Note: The signal strength indicator will react to fading and increasing signals.

•Time (if set)

•On/Off timer settings (if set)

•Remaining time on sleep timer (if set)

•Remaining time on game timer (if set)

•Stereo or SAP audio status

•V-Chip rating status

•Picture size

•Tuner hold* (if applicable)

*If you are recording on one tuner (for example, the digital tuner), you will be able to change channels on the other tuner only (the analog tuner in this example). The tuner from which you are recording is Òon holdÓ (i.e., locked) so your recordings will not be affected by channel changes.

•Video resolution

To close TV setting information on-screen:

Press RECALL again.