–88 –
Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the
“CARD READ/WRITE” SUB menu page of MAIN menu screen 2 of 4.
|Note{
When operating the unit with a remote controller, the CARD READ/WRITE page cannot be oper-
ated from the unit.
Formatting setup cards
1Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2Press the PAGE button to display the MAIN menu screen 3 of 4.
3Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
4Press the UP or DOWN button to open the CARD READ/WRITE page.
5Press the SHIFT/ITEM button repeatedly to move the cursor to the CARD CONFIG. position.
6A menu shown below appears when the UP (or DOWN) button is pressed.
7Press the UP button to format the set up card. When the setup card has been formatted, the
message shown below appears.
|Note{
When setup cards are formatted, the setting conditions at that time are also input simulta-
neously.
8When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
{
CARD
CARD
READ
READ
/
W
RITE
ONCFIG?
(Y:UP. N :
W
RITE
READ
DO
W
N)
SELECT
SELECT
1
1
CONF I G
USER DATA
|
¢
{
CARD
CARD
READ
READ
/
W
RITE
W
RITE
READ
SELECT
SELECT
1
1
CON
OK
FIG
U
ORFMAT
SER DATA
|
¢
{
CARD
CARD
READ
READ
/
W
RITE
W
RITE
READ
SELECT
SELECT
1
1
CONF I G
USER DATA
¢
|