![](/images/new-backgrounds/1141028/14102827x1.webp)
Controls and Their Functions
©
¢
£
§ ¶
•
(The viewfinder shown in the illustration is the
Shooting (Recording)/Playback Function Section (1)
¢Viewfinder (optional accessory)
£PEAKING control
This is used to adjust the contours of the images inside the viewfinder to facilitate focusing. It does not affect the camera’s output signals.
¤CONTRAST control
This is used to adjust the contrast of the screen inside the viewfinder. It does not affect the camera’s output signals.
¥BRIGHT control
This is used to adjust the brightness of the screen inside the viewfinder. It does not affect the camera’s output signals.
¦ZEBRA (zebra pattern) switch
This displays the zebra pattern inside the viewfinder. ON: The zebra pattern is displayed.
OFF: The zebra pattern is not displayed.
When the unit is shipped from the factory, the zebra pattern is set in such a way that those parts with an IRE video level from approx. 70% to 85% are displayed. The displaying of parts with a level ranging from 50% to 110% or more or with a certain level can also be set on the setting menu.
§Diopter control knob
This is adjusted in such a way that the images on the viewfinder screen are seen most clearly in accordance with the dioptric power of the camera’s operator.
¨Eyepiece
©Viewfinder
Loosen this lever to adjust the position of the viewfinder ¢ in the
ªEyepiece
Turn this ring to adjust the position of the eyepiece ¨ in the
«Viewfinder stopper screw
To detach the viewfinder ¢ from the camera, loosen this screw and then detach the view- finder.
– 14 –