–37 –
Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional AJ-VF10P.)
Mounting the Viewfinder
1Press down the viewfinder.
2Tighten the viewfinder stopper screw firmly. If it is difficult to insert the screw, press down the
viewfinder once again.
3Connect the plug to the viewfinder connector and secure the viewfinder cable with the clamp.
|Note{
Insert the plug firmly when connecting it to the viewfinder connector.
Detaching the Viewfinder
1Check that the POWER switch is set to OFF.
2Disconnect the plug from the viewfinder cable connector.
|Note{
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly with one
hand, resulting in damage to the viewfinder.
3Loosen the viewfinder stopper screw and detach the viewfinder by pulling it straight up.
Hook your fingers here.
Stopper Screw Pull straight up.
Stopper Screw