Setup Card Operations
Protecting stored data
If the setup card’s WRITE PROTECT switch is set to ON, data is not rewritten even if the UP button is pressed in step 7.
Set to ON.
When data is not written
If the following error messages appear when the UP button is pressed in step 7, the data is not written.
Data writing error messages
Error message | Condition | Countermeasure |
|
|
|
NO CONFIG | The setup card is not | Format the card. |
| formatted. |
|
|
|
|
NO CARD | A setup card is not | Insert a card. |
| inserted. |
|
|
|
|
WRITE PROTECT | The write protect switch on | Set the write protect switch |
| the side of the card is set | on the side of the card to |
| to ON. | OFF. |
|
|
|
ERROR | Data cannot be written on | The card may be |
| the card. | defective. Replace the |
|
| card. |
|
|
|
– 91 –
