Toshiba HD-A1 Powering on/Loading a disc, Press Front panel or Remote control, Press ON/STANDBY

Page 28

Chapter3Playback (Basic)

Powering on/Loading a disc

Turning the power on

1

Press

(front panel) or

(remote control).

 

ON/STANDBY indicator

ON/STANDBY button

ON/STANDBY button

When the power turns on, ON/STANDBY indicator on the front panel changes color from red (standby mode) to green (operation).

Turning the power off

1 Press ON/STANDBY.

The power turns off and ON/STANDBY indicator on the front panel turns red (standby mode).

Note

If the player freezes for about 15 minutes or more and will not respond to any buttons, holding down ON/STANDBY button on the front panel for about 10 seconds can force the player to turn off. However, this is an emergency measure, which may cause damage to the player. Avoid casual use of this measure.

Loading a disc

1

Press

(front panel) or

 

(remote control).

 

The player opens the door and then the disc

 

tray.

 

2

Place a disc in the hollow of the

 

disc tray with the playback side

 

down.

 

 

 

When using a

 

 

double-sided disc,

 

 

turn the label of the

 

 

playing side up.

After placing a disc, press DOOR (see right) or

OPEN/CLOSE.

Notes

Use the button on the front panel or the remote control to open and close the disc tray. Do not push or hold the disc tray while it is moving. Doing so may cause the player to malfunction.

Do not load a disc which is unplayable, or any object other than a playable disc.

Do not apply downforce to the disc tray. Doing so may cause the player to malfunction.

If the disc tray stops while closing, the mechanical protection system of this player will open it. Do not force it to close. Doing so may damage the disc tray. If the disc tray will not open, turn the player off, and press OPEN/CLOSE on the front panel. This may turn the player on and open the disc tray. If it still won’t open, contact your nearest TOSHIBA dealer.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents HD DVD player This HD DVD player employs a Laser System See service procedureMay result in hazardous radiation exposure Location of the required label 24!.4.3!&%49 .3425#4/.3 Connection Internet Precautions Do not use the unit when moisture condensation may occur Moisture condensation occurs during the following casesFeatures Accessories Remote controlCustomer support Batteries AAAx4 Hdmi cableTable of Contents 7Playable files 7Firmware update7Picture Others 7Audio 7Language 7Ethernet 7General Front panel Index to parts and controlsSee pages with arrows for details 7 6 Rear panelDisc indicator DisplayRemote control ReturnPreparation of the remote control Operating with the remote controlOpen the cover Insert batteries Close the coverOperating your TV with the remote control While holdingRelease Programming for TV controlHint on reading this manual Icons for function applicabilityInstructions and actual buttons Icon DiscConnections Connecting to a TV Switching output signals and setting the resolutionPress ControlPress remote control Press repeatedly remote controlConnecting to a TV with component video inputs Connecting to an audio system Via digital audio output Via 5.1ch analog audio outputVia Hdmi output Playback Basic Disc compatibility Pre-recorded discsRecordable discs you can play on this player Disc SpecificationOn handling discs On cleaning discsOn storing discs Powering on/Loading a disc Press Front panel or Remote controlPress ON/STANDBY DownPlaying a disc Stopping playback / Pausing playbackLoad a disc and close the disc tray. Using A/B/C/D buttons Press To select the title You wantPress / / / to select the title you want Playing from the top menuSelecting the sound of a disc recorded in DVD VR mode During playback, pressDisplayed on the TV screen Selecting the soundPress during playback Press while playing a scene recorded with multiple anglesSelecting subtitles Selecting the camera anglePlaying at various speeds Playing in fast reverse or fast forwardArea you want to input Press the number buttons toLocating by entering a section number Locating by entering elapsed timePlayback Advanced To select the repeat mode You can repeat a desired sectionPress / to select a file Playing MP3/WMA files on a CDPlayable files Using Extension ports Using the cursor function Checking the current status and settings Page Internet connection Before using Internet connection feature OutlineConnection requirement Basic Playback Connecting using a router e.g. Adsl Connection2nd Proxy Setting 1st Dhcp Setting3rd NTP Server Setting User information setting Sufficient bandwidth Select an item from the menuPages 44 to Page Others Customizing the function settings Press / to select the setting item, thenDuring stop, press Returns toProgressive TV Picture Bitstream AudioDownmixed PCM Language Ethernet General Set the detailsSelect On or Off by pressing / buttons. On Select the desired limitation level by pressing / buttonsAuto Power Off Update Firmware updatePress / / / buttons to select the input area 123Language code list Output sound conversion table PCMBefore calling service personnel Specification Component output Y, PB PRLimited Ninety 90 Day Warranty on Labor Limited One 1 Year Warranty on PartsYour Responsibility Rental UnitsHow to Obtain Warranty Services Canadian Warranty Information Garantie Canadienne This 12-month warranty will be strictly adhered toMemo Memo Memo Information on Customer Support
Related manuals
Manual 69 pages 55.84 Kb

HD-A1 specifications

The Toshiba HD-A1, introduced in March 2006, was a groundbreaking player in the high-definition era, marking Toshiba's entry into the next-generation DVD market. As the first HD DVD player available to consumers, it played a pivotal role in the format war between HD DVD and Blu-ray.

One of the standout features of the HD-A1 was its ability to deliver stunning 1080p video resolution. This high-definition output brought enhanced clarity and detail to films, significantly improving the viewing experience compared to standard DVDs. The player was equipped with an HDMI 1.1 output, which allowed for high-bandwidth digital content protection, ensuring that the video and audio quality remained uncompromised during transmission to compatible high-definition displays.

In terms of audio capabilities, the HD-A1 supported advanced audio formats like Dolby Digital Plus and DTS-HD, offering home theater enthusiasts a more immersive sound experience. The player also featured a built-in HDMI upscaling, enabling it to upscale standard DVDs to near HD quality, ensuring that consumers could enjoy their existing collections in a new light.

Additionally, the Toshiba HD-A1 included a range of connectivity options. It came with component video outputs, composite video outputs, and optical and coaxial digital audio outputs, catering to a variety of home entertainment setups. The player also had a USB port, although this feature was limited at launch and primarily intended for potential future enhancements through firmware updates.

The build quality of the HD-A1 was robust, featuring an attractive design with a sleek black finish and a user-friendly interface. The front panel had a simple layout, consisting of essential buttons and a bright LCD display that made navigation straightforward.

While the HD-A1 faced stiff competition from the Blu-ray disc format, it was well-received initially, appealing to early adopters of high-definition technology. However, as the format war progressed, the eventual defeat of HD DVD in 2008 led to the HD-A1 being overshadowed by Blu-ray players. Nonetheless, the Toshiba HD-A1 remains an important piece of technology history, representing a significant step forward in home entertainment and offering a window into the evolution of video formats.
Top Page Image Contents