SETTING
Remote control
This projector has eight different remote control codes; the factory- set normal code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.
For example operating projector in “Code 7,” both projector and Remote Control Unit must be switched to “Code 7.”
To change the code of Projector;
To change the Remote control code of the projector used in ON- SCREEN MENU is selectable from Code 1 to Code 8.
To change the code of the Remote Control Unit;
To change the remote control code of the Remote Control Unit, set the DIP switches
USB
This Projector is equipped with USB port for interactive operation between a projector and computer. Set mode following steps below.
Wireless Mouse mode
Select "
" when controlling a computer with Remote Control of this projector.
Projector mode
"
" Not used.
Key lock
This function locks the operation of the projector's control panel and the remote control.
This cancels the Key lock function.
This locks operation of the projector's control panel.
This locks operation of the remote control.
If the projector's control panel accidentally becomes locked and you do not have the remote control nearby, disconnect the AC cord to turn off the power, and then while pressing a SELECT button, reinsert the AC cord, This will cancel the projector's control panel lock.
Remote control
When pressing SELECT button at Remote control, Remote con- trol code Menu appears.
USB
Move a pointer to item and then press POINT LEFT/RIGHT button(s).
Key lock
41
