Eiki LC-W4 Computer Input, Selecting Input Source, Selecting Computer System, Input Menu

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT 1, INPUT 2 and INPUT 3 buttons on Remote Control Unit.

Select INPUT source by pressing INPUT ▲/▼ button on Top Control.

MENU OPERATION

INPUT 1 button

INPUT 1

INPUT 2 button

INPUT 2

INPUT 3 button

INPUT 3

INPUT ▲/▼ buttons

INPUT 1

INPUT 2

INPUT 3

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to select Input and press SELECT
	button. Another dialog box INPUT SELECT Menu will appear.
2	Press POINT DOWN button to move arrow to INPUT source that
	you want to select, and then press SELECT button.

INPUT Menu icon

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 1 (DVI INPUT TERMINAL )

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	1 and then press SELECT button. Source Select Menu will
	appear.
3	Move a pointer to either Digital or Analog and then press
	SELECT button.
		When digital signal is connected on DVI terminal, select
Digital
		Digital.
		When analog signal is connected on DVI terminal, select
Analog
		Analog.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 1 and press SELECT button.

Input 1

Source Select Menu

Move a pointer to Digital or Analog and press SELECT button.

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connect a computer output [5 BNC Type (Red, Green, Blue, Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV and V jacks.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	2 and then press SELECT button. Source Select Menu will

	appear.
3	Move a pointer to "RGB", and then press SELECT button.

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

Input 2

Source Select Menu

Move a pointer to RGB and press SELECT button.

25