APPENDIX
INDICATORS AND PROJECTOR CONDITION
Check the Indicators for projector condition.
| Indicators |
| Projector Condition | ||
LAMP | WARNING | READY | LAMP | ||
REPLACE | TEMP. |
|
| ||
green | red |
|
| ||
yellow | red |
|
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| The projector is OFF. (The MAIN SWITCH OFF POSITION OR | |
|
|
|
| THE AC Power Cord is unplugged.) | |
|
|
|
|
| |
✽ |
|
|
| The projector is READY to be turned on with the POWER ON- | |
|
|
| OFF button. | ||
|
|
|
| ||
|
|
|
|
| |
✽ |
|
|
| The projector is operating normally. | |
|
|
|
|
| |
|
|
|
| The temperature inside the projector is abnormally high. The | |
|
|
|
| projector cannot be turned on. When the projector is cooled | |
✽ |
|
|
| down enough and the temperature returns to normal, the READY | |
|
|
| indicator lights green and the projector can be turned on. (The | ||
|
|
|
| ||
|
|
|
| WARNING TEMP. indicator keeps flashing.) Check and clean | |
|
|
|
| the Air Filter. | |
|
|
|
|
| |
|
|
|
| The projector is cooled down enough and the temperature | |
✽ |
|
|
| returns to normal. When turning on the projector, the WARNING | |
|
|
|
| TEMP. indicator stops flashing. Check and clean the Air Filter. | |
|
|
|
|
| |
✽ |
|
|
| The projector is being cooled down. It cannot be turned on until | |
|
|
| the READY indicator lights green. | ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
| The projector detects an abnormal condition and cannot be | |
|
|
|
| turned on. Unplug the AC Power Cord and plug it again to turn | |
✽ |
|
|
| on the projector. If the projector is turned off again, disconnect | |
|
|
| the AC Power Cord and contact the dealer or the service center | ||
|
|
|
| ||
|
|
|
| for service and checkup. Do not leave the projector on. It may | |
|
|
|
| cause electric shock or a fire hazard. | |
|
|
|
|
|
|
✽
The projector is in the Power management mode.
• • • on | • • • flashing | • • • dim | • • • off |
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.
50
