SECTION 2: Auto-Search Method
The
STEP 1: Using your old remote, turn on the component you want to program with the GAMER... let’s say your TV.
STEP 2: Now, press down on the component button, in this case the button that says TV, and the SELECT (SEL) button at the same time. Hold them both down for 3 seconds until the TV component button LED light turns on.
IMPORTANT: If you don’t press a button within 20 seconds, the LED light will turn off and exit the
STEP 3: Press and release the UP ARROW button. Please note, each time the Up Arrow is pressed, the code will count up one code number and send a Power OFF signal. When the correct code is sent out, the component will turn off.
12