Universal Remote Control Universl Remote Erasing All Learned Commands from One Component Mode

SECTION 2: Erasing All Learned Commands from One Component Mode

This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple.

STEP 1: Press and hold both the desired component button and the ENTER (ENT) button at the same time for about 3 seconds until the component LED light turns on.

IMPORTANT: If you don’t press a button within 20 seconds, the LED light will turn off and exit the set-up mode and you will need to start over.

STEP 2: Press and hold both the desired component button you want to erase and the PAUSE button for about three seconds, until the component LED light blinks twice to confirm the erasure.

STEP 3: To exit, press and hold both the component button and the ENTER (ENT) button until the component LED light blinks three times.

29