Universal Remote Control Universl Remote See the following notes regarding the Learning process

If the Learning Method does not work, here are a few suggestions:

•If you have a Plasma TV, move to another room

•Avoid programming under fluorescent light or direct sunlight

•Put new batteries in your old remote

•Gradually vary the distance between the two remote controls.

•Tap the button on your old remote instead of pressing and holding it during the learning process.

See the following notes regarding the Learning process:

•Learned functions override any existing pre-programmed functions on the remote control.

•All buttons for the seven component modes can be learned except for the LIGHT button.

•Learned functions are automatically erased when a new function is learned on the same button.

•Learned functions are retained even after a different Set-up Code number is programmed into the remote control.

•To return to an original pre-programmed function, a learned function must be erased.

17