Toshiba MD13Q42, MD20Q42 owner manual TV operation

CH 012

TV operation

TV operation

POWER 0–9

VOL +/–

TV operation

1 To turn on the TV/DVD, press POWER. The Power indicator will light.

2 Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

VOLUME32

3 Set the TV/CABLE selection to the appropriate position 23 .

TV - VHF/UHF channels

CABLE - Cable TV channels

4 Press Direct channel selection buttons (0–9) to select the channel.

TV mode direct channel selection

When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to

select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.

CABLE mode direct channel selection When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:

TO SELECT CABLE TV CHANNELS:

1-9: Press “0” twice, then 1-9 as needed. Example, to select channel 2, press “002”.

10-12: Press “0”, then the remaining 2 digits. Example, to select channel 12, press “012”.

13-99: Press the 2 digits in order. Example, to select channel 36, press “36”.

100-125: Press the 3 digits in order. Example, to select channel 120, press “120”.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV	CABLE
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36
	(A) (W)
	37-59
	(AA) (WW)
	60-85
	(AAA) (ZZZ)
	86-94
	(86) (94)
	95-99
	(A-5) (A-1)
	100-125
	(100) (125)
	01
	(5A)

	Notes:
	•	If a channel with no broadcast is selected, the sound will auto-
		matically be muted.
20	• If a station being viewed stops broadcasting, the TV will auto-
		matically shut itself off after 15 minutes.

5X30401A [E] (P13-23) 20 12/3/05, 3:30 PM