Jpeg playback, CD Jpeg CD playback | Toshiba MD20Q42, MD13Q42

JPEG playback

You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen).

CAUTION:

Some JPEG CDs cannot be played back depending on the recording conditions.

0–9

PAUSE

ENTER

▲/ ▼ / /

STOP

PLAY SKIP /

ANGLE

CD JPEG CD playback

1 Place a JPEG disc on the disc tray.

2 A file menu screen will appear on the screen. Press / to select folder.

CD				-/36


	Collection
1		Pic-1	8	Pic-8
2		Pic-2	9	Pic-9
3		Pic-3	10	Pic-10
4		Pic-4	11	Pic-11

3 Press// / or Number buttons (0–9) to se- lect the desired file.

• To display next list, press SKIP or .

4 Press ENTER. The selected picture appears on the screen.

Rotating an image

You can rotate an image by 90 degrees. Press ANGLE during playback of the image.

“”, “ ”, “” or “ ” appears briefly on the screen.

5 Press STOP to end playback.

The file menu appears on the screen.

If you want to watch the other file, repeat steps 3 ~ 4.

CD Slide show playback

The slide show enables you to view pictures (files) one after another automatically.

Preparation:

Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” 40 .

1 Select your desired starting file for the slide show in the step 3 on left.

2 Press ENTER to start slide show from the se- lected file.

•If you press PAUSE during the slide show, the slide show stops temporary. “ 4 ” appears briefly on the screen.

If the picture appears upside down or sideways, press ANGLE repeatedly until it’s right side up.

“ ”, “ ”, “” or “ ” appears briefly on the screen.

Press PLAY or SKIP again to resume the slide show.

•When the slide show playback finished, the file list ap- pears.

•To stop the slide show, press STOP. The file list ap- pears.

JPEG CD Information

Limitations on JPEG CD playback

•JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “jpg”.

•The directory and file names of the JPEG CD must be correspond to the ISO standardized files.

•This unit can read 600 files per disc. If a disc has more than 600 files, it reads up to 600 files, the remaining files will be omitted.

•The unit is able to recognize up to a maximum of 50 directories per disc.

•It may take more than one minute for this unit to read JPEG files depending on its structure.

Advanced playback

Notes:

•During JPEG playback, you cannot use SEARCH and A-B Repeat functions.

•You can use Repeat (Track or All), Random and Program functions for JPEG CD playback 32 33 .

Limitations on display

•The maximum number for display is 16 letters. Available letters for display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).

•Other letters than those above are replaced in hyphen.

Notes on JPEG files

To play back JPEG CD in the recorded order,

1.Use JPEG software that records data alphabetically or numerically.

2.Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

5X30401A [E] (P33-37)

12/3/05, 3:31 PM