Model applicable : 19AV550 Series
Assemble (TV set body and stand fix type)
(1)Please take out the LCD color TV from the
LCD TV case.
(2)Remove the stand part from the LCD TV.
1Rotate the TV stand to its position generally used. To avoid scratching the LCD screen, please place a soft cloth on a table etc, and then put the LCD TV on the cloth with its screen facing down.
2Remove the 4 screws used to fix the stand.
3Remove the stand from the TV.
4 securing screws
Remove the stand
Stand part
*Please keep to the stand and fix screws.
(3)Attach the bracket of TV side to the LCD
color TV.
1 Tear off adhesive tapes of the supplied (four) paddings, align its hole with fixing bolts, and affix it to the screw place of TV side.
2Align the screw hole of bracket of TV side with which
of the TV, attach the bracket firmly to the TV with four supplied screws (M4 ⋅ 14mm).
To fix at 4 outer side holes
Spacer
TV mounting bracket
Caution
The supplied screws and paddings should be
used.
Other screws and paddings may cause function change, electric shock (in case of long screws), or lead to insufficient strength (in case of short screws) etc.
■ Parts list
Product name | Quantity | |
|
| |
TV side bracket | 1 | |
|
| |
1 | ||
|
| |
1 | ||
|
| |
4 | ||
(M5 ⋅ 14mm) | ||
| ||
|
| |
Screw (M4 ⋅ 14mm) | 4 | |
|
| |
Spacer (with tape attached) | 4 | |
|
|
Nominal method of screws is as below.
t=1.8
FLAT WASHER
SPRING WASHIER
M4
14
(4)Assemble the tilt-adjustable bracket,
adjust the angle.
1Assemble the
Rotation center
2Move the
3After installing the TV, confirm the preference angle with the customers and make adjustment accord- ing to the points described in (2) above. After mak- ing adjustment, tighten firmly the 4 securing screws mentioned in (1) and (2) above to fix the
(5)Attach the Wall-mount Bracket.
Attach the
(4 positions shown as below)
Be sure to fix the screws into the strong and reliable wood or post inside the wall firmly.
(Attaching on the boards such as thin complex board/ plasterboard will be very dangerous, so please be sure to avoid such places.)
■Determine the Position before Attaching the
The relationship of position for the LCD TV and the
Lower side of
Bracket
149mm
■Angle adjustment of the LCD TV is shown as below
the 1st hole from the top tilt upwards 20 degrees the 2nd hole tilt upwards 10 degrees the 3rd hole tilt 0 degree
the 4th hole tilt downwards 10 degrees the 5th hole tilt downwards 20 degrees
LCD TV side
(6)Attach the LCD TV to the
bracket installed on the wall.
1Align the bracket holes on the rear of the LCD TV with the hooks of the
(This illustration is drawn as you can see through the TV.)
Hook
2By slightly lowering the LCD TV, you can hitch it on the hook.
Slightly lower to hitch it on the hook
3Move left the LCD TV to lock it. Make sure that the TV will not fall off.
Move left to lock it
■Wall material/Screw, Expansion Anchor Bolt Corresponding Table
Wall material | Expansion anchor bolt/ |
| screw used |
|
|
Plasterboard/ | fix into the post inside the wall |
Complex board | the screw firmly fixable into the |
(less than 10mm) | post inside the wall |
|
|
Complex board | tapping screw (ø 4 ⋅ 18) |
(above 10mm) |
|
|
|
Wood post | tapping screw (ø 4 ⋅ 18) |
|
|
Concrete | expansion anchor bolt |
|
|